Post Stock Login Register

EN 10088-1 X2CrNiMoN25-7-4 vs ASTM A276/A276M S32750

Strong Match — 89.9% match based on chemical composition and mechanical property overlap.

EN 10088-1 X2CrNiMoN25-7-4 (EN 10088-1:2023) and ASTM A276/A276M S32750 (ASTM A276/A276M:2017) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X2CrNiMoN25-7-4 is defined under European Standard (EN), originating from Europe, while ASTM A276/A276M S32750 is defined under ASTM International, originating from United States.

As per chemical composition, EN 10088-1 X2CrNiMoN25-7-4 vs ASTM A276/A276M S32750 is a 89.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 89.9%.

Frequently Compared With EN 10088-1 X2CrNiMoN25-7-4:
ASTM A959 2507 EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoVH ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH
Match Breakdown
CHEMISTRY MATCH
89.9%
MECHANICAL MATCH
No shared data
OVERALL
89.9%
Specifications
Property EN 10088-1 X2CrNiMoN25-7-4 ASTM A276/A276M S32750
Standard EN 10088-1:2023 ASTM A276/A276M:2017
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.030
Si (%) <=1.00 <=0.80
Mn (%) <=2.00 <=1.20
P (%) <=0.035 <=0.035
S (%) <=0.015 <=0.020
Cr (%) 24.0-26.0 24.0-26.0
Mo (%) 3.00-4.5 3.0-5.0
Ni (%) 6.0-8.0 6.0-8.0
N (%) 0.24-0.35 0.24-0.32
Cu (%) Not specified <=0.50
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X2CrNiMoN25-7-4 ASTM A276/A276M S32750
Tensile Strength Not specified >=800 MPa
Yield Strength Not specified >=550 MPa
Elongation Not specified >=15%
Hardness Not specified <=310 HB
Condition Not specified Condition A (Annealed), hot-finished or cold-finished, up to 2 [50.8] incl sizes (first row printed)
Typical Applications
EN 10088-1 X2CrNiMoN25-7-4
Not documented
ASTM A276/A276M S32750
Stainless steel bars and shapes (hot-finished or cold-finished)
Key Differences
Can EN 10088-1 X2CrNiMoN25-7-4 Be Substituted With ASTM A276/A276M S32750?
EN 10088-1 X2CrNiMoN25-7-4 and ASTM A276/A276M S32750 overlap closely enough on chemistry and mechanical properties that ASTM A276/A276M S32750 is often considered as a substitute for EN 10088-1 X2CrNiMoN25-7-4 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
EN 10088-1 X2CrNiMoN25-7-4
0 active listings and RFQs →
ASTM A276/A276M S32750
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X2CrNiMoN25-7-4 and ASTM A276/A276M S32750?
ASTM A276/A276M S32750 specifies Cu which is not specified for EN 10088-1 X2CrNiMoN25-7-4.
Can EN 10088-1 X2CrNiMoN25-7-4 be substituted with ASTM A276/A276M S32750?
EN 10088-1 X2CrNiMoN25-7-4 and ASTM A276/A276M S32750 overlap closely enough on chemistry and mechanical properties that ASTM A276/A276M S32750 is often considered as a substitute for EN 10088-1 X2CrNiMoN25-7-4 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.