Post Stock Login Register

EN 10088-1 X2CrNiMoV13-5-2 vs ASTM A276/A276M S41500

Related Material — 62.5% match based on chemical composition and mechanical property overlap.

EN 10088-1 X2CrNiMoV13-5-2 (EN 10088-1:2023) and ASTM A276/A276M S41500 (ASTM A276/A276M:2017) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X2CrNiMoV13-5-2 is defined under European Standard (EN), originating from Europe, while ASTM A276/A276M S41500 is defined under ASTM International, originating from United States.

As per chemical composition, EN 10088-1 X2CrNiMoV13-5-2 vs ASTM A276/A276M S41500 is a 62.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 62.5%.

Frequently Compared With EN 10088-1 X2CrNiMoV13-5-2:
GOST 5632 06Kh23N28 EN 10088-1 1.4301 ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
62.5%
MECHANICAL MATCH
No shared data
OVERALL
62.5%
Specifications
Property EN 10088-1 X2CrNiMoV13-5-2 ASTM A276/A276M S41500
Standard EN 10088-1:2023 ASTM A276/A276M:2017
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.05
Si (%) <=0.50 <=0.60
Mn (%) <=0.50 0.50-1.00
P (%) <=0.040 <=0.030
S (%) <=0.015 <=0.030
Cr (%) 11.5-13.5 11.5-14.0
Mo (%) 1.50-2.50 0.50-1.00
Ni (%) 4.5-6.5 3.5-5.5
Ti (%) <=0.010 Not specified
V (%) 0.10-0.50 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X2CrNiMoV13-5-2 ASTM A276/A276M S41500
Tensile Strength Not specified >=795 MPa
Yield Strength Not specified >=620 MPa
Elongation Not specified >=15%
Hardness Not specified <=295 HB
Condition Not specified Condition T (Hardened and tempered, higher temperature), hot-finished or cold-finished, all sizes (first row printed)
Typical Applications
EN 10088-1 X2CrNiMoV13-5-2
Not documented
ASTM A276/A276M S41500
Stainless steel bars and shapes (hot-finished or cold-finished)
Key Differences
Can EN 10088-1 X2CrNiMoV13-5-2 Be Substituted With ASTM A276/A276M S41500?
EN 10088-1 X2CrNiMoV13-5-2 and ASTM A276/A276M S41500 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10088-1 X2CrNiMoV13-5-2
0 active listings and RFQs →
ASTM A276/A276M S41500
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X2CrNiMoV13-5-2 and ASTM A276/A276M S41500?
EN 10088-1 X2CrNiMoV13-5-2 specifies Ti, V which are not specified for ASTM A276/A276M S41500.
Can EN 10088-1 X2CrNiMoV13-5-2 be substituted with ASTM A276/A276M S41500?
EN 10088-1 X2CrNiMoV13-5-2 and ASTM A276/A276M S41500 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.