Post Stock Login Register

EN 10088-1 X2CrNiMoV13-5-2 vs JIS G4304 SUS445J2

Related Material — 62.2% match based on chemical composition and mechanical property overlap.

EN 10088-1 X2CrNiMoV13-5-2 (EN 10088-1:2023) and JIS G4304 SUS445J2 (JIS G4304:2021) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X2CrNiMoV13-5-2 is defined under European Standard (EN), originating from Europe, while JIS G4304 SUS445J2 is defined under Japanese Industrial Standards (JIS), originating from Japan.

As per chemical composition, EN 10088-1 X2CrNiMoV13-5-2 vs JIS G4304 SUS445J2 is a 62.2% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 62.2%.

Frequently Compared With EN 10088-1 X2CrNiMoV13-5-2:
GOST 5632 06Kh23N28 EN 10088-1 1.4301 EN 10088-1 1.4006 EN 10088-1 1.4401 EN 10088-1 1.4845 ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
62.2%
MECHANICAL MATCH
No shared data
OVERALL
62.2%
Specifications
Property EN 10088-1 X2CrNiMoV13-5-2 JIS G4304 SUS445J2
Standard EN 10088-1:2023 JIS G4304:2021
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.025
Si (%) <=0.50 <=1.00
Mn (%) <=0.50 <=1.00
P (%) <=0.040 <=0.040
S (%) <=0.015 <=0.030
Cr (%) 11.5-13.5 21.00-24.00
Mo (%) 1.50-2.50 1.50-2.50
Ni (%) 4.5-6.5 <=0.60
Ti (%) <=0.010 Not specified
V (%) 0.10-0.50 Not specified
N (%) Not specified <=0.025
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X2CrNiMoV13-5-2 JIS G4304 SUS445J2
Tensile Strength Not specified >=410 MPa
Yield Strength Not specified >=245 MPa
Elongation Not specified >=20%
Hardness Not specified <=217 HB
Condition Not specified Annealed plate and strip; proof strength applies only when specified by the purchaser
Typical Applications
EN 10088-1 X2CrNiMoV13-5-2
Not documented
JIS G4304 SUS445J2
Hot-rolled stainless steel plates and strips
Key Differences
Can EN 10088-1 X2CrNiMoV13-5-2 Be Substituted With JIS G4304 SUS445J2?
EN 10088-1 X2CrNiMoV13-5-2 and JIS G4304 SUS445J2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10088-1 X2CrNiMoV13-5-2
0 active listings and RFQs →
JIS G4304 SUS445J2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X2CrNiMoV13-5-2 and JIS G4304 SUS445J2?
EN 10088-1 X2CrNiMoV13-5-2 specifies Ti, V which are not specified for JIS G4304 SUS445J2. JIS G4304 SUS445J2 specifies N which is not specified for EN 10088-1 X2CrNiMoV13-5-2.
Can EN 10088-1 X2CrNiMoV13-5-2 be substituted with JIS G4304 SUS445J2?
EN 10088-1 X2CrNiMoV13-5-2 and JIS G4304 SUS445J2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.