Post Stock Login Register

EN 10088-1 X2CrSiTi15 vs EN 10088-1 1.4401

Minimal Match — 50.6% match based on chemical composition and mechanical property overlap.

EN 10088-1 X2CrSiTi15 (EN 10088-1:2023) and EN 10088-1 1.4401 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X2CrSiTi15 is defined under European Standard (EN), originating from Europe, while EN 10088-1 1.4401 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10088-1 X2CrSiTi15 vs EN 10088-1 1.4401 is a 50.6% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a minimal match overall at 50.6%.

Frequently Compared With EN 10088-1 X2CrSiTi15:
ASTM A959 .- EN 10088-1 1.4301 GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr13H
Match Breakdown
CHEMISTRY MATCH
50.6%
MECHANICAL MATCH
No shared data
OVERALL
50.6%
Specifications
Property EN 10088-1 X2CrSiTi15 EN 10088-1 1.4401
Standard EN 10088-1:2023 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.030 ≤0.07
Si (%) 0.20-1.50 ≤1.00
Mn (%) <=1.00 ≤2.00
P (%) <=0.050 Not specified
S (%) <=0.050 Not specified
Cr (%) 13.0-16.0 16.5–18.5
Mo (%) <=0.50 2.0–2.5
Ni (%) <=0.50 10.5–13.5
Nb (%) <=0.50 Not specified
Al (%) <=1.50 Not specified
Cu (%) <=0.50 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X2CrSiTi15 EN 10088-1 1.4401
Tensile Strength Not specified ≥520 MPa
Yield Strength Not specified ≥210 MPa
Elongation Not specified ≥40%
Hardness Not specified ≤215 HB
Typical Applications
EN 10088-1 X2CrSiTi15
Not documented
EN 10088-1 1.4401
Marine, chemical processing, pharmaceutical equipment
Key Differences
Can EN 10088-1 X2CrSiTi15 Be Substituted With EN 10088-1 1.4401?
EN 10088-1 X2CrSiTi15 and EN 10088-1 1.4401 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
EN 10088-1 X2CrSiTi15
No active listings currently.
EN 10088-1 1.4401
Sheet → (4 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2500–3400 mm (98.43–133.86 in)
On M-EX Right Now
EN 10088-1 X2CrSiTi15
0 active listings and RFQs →
EN 10088-1 1.4401
4 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X2CrSiTi15 and EN 10088-1 1.4401?
EN 10088-1 X2CrSiTi15 specifies P, S, Nb, Al which are not specified for EN 10088-1 1.4401.
Can EN 10088-1 X2CrSiTi15 be substituted with EN 10088-1 1.4401?
EN 10088-1 X2CrSiTi15 and EN 10088-1 1.4401 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.