Post Stock Login Register

EN 10088-1 X30MnCrN16-14 vs ASTM A959 SS410

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

EN 10088-1 X30MnCrN16-14 (EN 10088-1:2023) and ASTM A959 SS410 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X30MnCrN16-14 is defined under European Standard (EN), originating from Europe, while ASTM A959 SS410 is defined under ASTM International, originating from United States.

As per chemical composition, EN 10088-1 X30MnCrN16-14 vs ASTM A959 SS410 is a 70.6% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With EN 10088-1 X30MnCrN16-14:
EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
70.6%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property EN 10088-1 X30MnCrN16-14 ASTM A959 SS410
Standard EN 10088-1:2023 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) 0.20-0.40 <=0.15
Si (%) <=1.00 <=1.00
Mn (%) 14.0-18.0 <=1.00
P (%) <=0.045 <=0.040
S (%) <=0.015 <=0.030
Cr (%) 12.0-16.0 11.5-13.5
N (%) 0.20-0.40 Not specified
Cu (%) <=2.00 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
EN 10088-1 X30MnCrN16-14
Not documented
ASTM A959 SS410
Cutlery, turbine blades, surgical instruments, fasteners
Key Differences
Can EN 10088-1 X30MnCrN16-14 Be Substituted With ASTM A959 SS410?
EN 10088-1 X30MnCrN16-14 and ASTM A959 SS410 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
EN 10088-1 X30MnCrN16-14
No active listings currently.
ASTM A959 SS410
Round Bar → (3 listings)
Diameter: 40–40 mm (1.57–1.57 in)
Length: 2800–3300 mm (110.24–129.92 in)
On M-EX Right Now
EN 10088-1 X30MnCrN16-14
0 active listings and RFQs →
ASTM A959 SS410
3 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X30MnCrN16-14 and ASTM A959 SS410?
EN 10088-1 X30MnCrN16-14 specifies N, Cu which are not specified for ASTM A959 SS410.
Can EN 10088-1 X30MnCrN16-14 be substituted with ASTM A959 SS410?
EN 10088-1 X30MnCrN16-14 and ASTM A959 SS410 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.