Post Stock Login Register

EN 10088-1 X39CrMo17-1 vs IS 1570 (Part 5) X108Cr17Mo

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

EN 10088-1 X39CrMo17-1 (EN 10088-1:2023) and IS 1570 (Part 5) X108Cr17Mo (IS 1570 (Part 5):1985) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X39CrMo17-1 is defined under European Standard (EN), originating from Europe, while IS 1570 (Part 5) X108Cr17Mo is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, EN 10088-1 X39CrMo17-1 vs IS 1570 (Part 5) X108Cr17Mo is a 72.3% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With EN 10088-1 X39CrMo17-1:
GOST 5632 08X18H10 EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
72.3%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property EN 10088-1 X39CrMo17-1 IS 1570 (Part 5) X108Cr17Mo
Standard EN 10088-1:2023 IS 1570 (Part 5):1985
Category Stainless Steel Stainless Steel
C (%) 0.33-0.45 0.95-1.20
Si (%) <=1.00 <=1.0
Mn (%) <=1.50 <=1.0
P (%) <=0.040 <=0.045
S (%) <=0.015 <=0.030
Cr (%) 15.5-17.5 16.0-18.0
Mo (%) 0.80-1.30 <=0.75
Ni (%) <=1.00 <=0.50
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X39CrMo17-1 IS 1570 (Part 5) X108Cr17Mo
Hardness Not specified <=269 HB
Condition Not specified Annealed, quenched or solution treated plates, sheets and strips (Table 2)
Can EN 10088-1 X39CrMo17-1 Be Substituted With IS 1570 (Part 5) X108Cr17Mo?
EN 10088-1 X39CrMo17-1 and IS 1570 (Part 5) X108Cr17Mo share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10088-1 X39CrMo17-1
0 active listings and RFQs →
IS 1570 (Part 5) X108Cr17Mo
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X39CrMo17-1 and IS 1570 (Part 5) X108Cr17Mo?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10088-1 X39CrMo17-1 be substituted with IS 1570 (Part 5) X108Cr17Mo?
EN 10088-1 X39CrMo17-1 and IS 1570 (Part 5) X108Cr17Mo share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.