Post Stock Login Register

EN 10088-1 X3CrMnNiN20-9-6 vs ASTM A240/A240M S32001

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

EN 10088-1 X3CrMnNiN20-9-6 (EN 10088-1:2023) and ASTM A240/A240M S32001 (ASTM A240/A240M:2025) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X3CrMnNiN20-9-6 is defined under European Standard (EN), originating from Europe, while ASTM A240/A240M S32001 is defined under ASTM International, originating from United States.

As per chemical composition, EN 10088-1 X3CrMnNiN20-9-6 vs ASTM A240/A240M S32001 is a 72.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With EN 10088-1 X3CrMnNiN20-9-6:
ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
72.5%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property EN 10088-1 X3CrMnNiN20-9-6 ASTM A240/A240M S32001
Standard EN 10088-1:2023 ASTM A240/A240M:2025
Category Stainless Steel Stainless Steel
C (%) <=0.040 <=0.030
Si (%) <=1.00 <=1.00
Mn (%) 8.0-10.0 4.00-6.00
P (%) <=0.045 <=0.040
S (%) <=0.030 <=0.030
Cr (%) 19.0-21.5 19.5-21.5
Mo (%) <=0.75 <=0.60
Ni (%) 5.5-7.5 1.00-3.00
N (%) 0.15-0.40 0.05-0.17
Cu (%) Not specified <=1.00
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X3CrMnNiN20-9-6 ASTM A240/A240M S32001
Tensile Strength Not specified >=620 MPa
Yield Strength Not specified >=450 MPa
Elongation Not specified >=25%
Hardness Not specified <=25 HRC
Condition Not specified Plate, sheet and strip; yield by 0.2 percent offset
Typical Applications
EN 10088-1 X3CrMnNiN20-9-6
Not documented
ASTM A240/A240M S32001
Pressure vessels and general applications (plate, sheet and strip)
Key Differences
Can EN 10088-1 X3CrMnNiN20-9-6 Be Substituted With ASTM A240/A240M S32001?
EN 10088-1 X3CrMnNiN20-9-6 and ASTM A240/A240M S32001 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10088-1 X3CrMnNiN20-9-6
0 active listings and RFQs →
ASTM A240/A240M S32001
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X3CrMnNiN20-9-6 and ASTM A240/A240M S32001?
ASTM A240/A240M S32001 specifies Cu which is not specified for EN 10088-1 X3CrMnNiN20-9-6.
Can EN 10088-1 X3CrMnNiN20-9-6 be substituted with ASTM A240/A240M S32001?
EN 10088-1 X3CrMnNiN20-9-6 and ASTM A240/A240M S32001 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.