Post Stock Login Register

EN 10088-1 X3CrNiMoBN17-13-3 vs ASTM A276/A276M S31653

Close Alternative — 81.7% match based on chemical composition and mechanical property overlap.

EN 10088-1 X3CrNiMoBN17-13-3 (EN 10088-1:2023) and ASTM A276/A276M S31653 (ASTM A276/A276M:2017) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X3CrNiMoBN17-13-3 is defined under European Standard (EN), originating from Europe, while ASTM A276/A276M S31653 is defined under ASTM International, originating from United States.

As per chemical composition, EN 10088-1 X3CrNiMoBN17-13-3 vs ASTM A276/A276M S31653 is a 81.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 81.7%.

Frequently Compared With EN 10088-1 X3CrNiMoBN17-13-3:
ASTM A959 .- EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
81.7%
MECHANICAL MATCH
No shared data
OVERALL
81.7%
Specifications
Property EN 10088-1 X3CrNiMoBN17-13-3 ASTM A276/A276M S31653
Standard EN 10088-1:2023 ASTM A276/A276M:2017
Category Stainless Steel Stainless Steel
C (%) <=0.04 <=0.030
Si (%) <=0.75 <=1.00
Mn (%) <=2.00 <=2.00
P (%) <=0.035 <=0.045
S (%) <=0.015 <=0.030
Cr (%) 16.0-18.0 16.0-18.0
Mo (%) 2.00-3.00 2.00-3.00
Ni (%) 12.0-14.0 10.0-13.0
N (%) 0.10-0.18 0.10-0.16
B (%) 0.0015-0.0050 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X3CrNiMoBN17-13-3 ASTM A276/A276M S31653
Tensile Strength Not specified >=515 MPa
Yield Strength Not specified >=205 MPa
Elongation Not specified >=40%
Condition Not specified Condition A (Annealed), hot-finished, all sizes (first row printed)
Typical Applications
EN 10088-1 X3CrNiMoBN17-13-3
Not documented
ASTM A276/A276M S31653
Stainless steel bars and shapes (hot-finished or cold-finished)
Key Differences
Can EN 10088-1 X3CrNiMoBN17-13-3 Be Substituted With ASTM A276/A276M S31653?
EN 10088-1 X3CrNiMoBN17-13-3 and ASTM A276/A276M S31653 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
EN 10088-1 X3CrNiMoBN17-13-3
0 active listings and RFQs →
ASTM A276/A276M S31653
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X3CrNiMoBN17-13-3 and ASTM A276/A276M S31653?
EN 10088-1 X3CrNiMoBN17-13-3 specifies B which is not specified for ASTM A276/A276M S31653.
Can EN 10088-1 X3CrNiMoBN17-13-3 be substituted with ASTM A276/A276M S31653?
EN 10088-1 X3CrNiMoBN17-13-3 and ASTM A276/A276M S31653 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.