Post Stock Login Register

EN 10088-1 X53CrSiMoVN16-2 vs ASTM A681 P2

Related Material — 58.6% match based on chemical composition and mechanical property overlap.

EN 10088-1 X53CrSiMoVN16-2 (EN 10088-1:2023) and ASTM A681 P2 (ASTM A681:2008) are both steel grades. EN 10088-1 X53CrSiMoVN16-2 is classified under Stainless Steel, while ASTM A681 P2 is classified under Tool & Die Steels — a different category, which is worth noting alongside the chemistry match below. EN 10088-1 X53CrSiMoVN16-2 is defined under European Standard (EN), originating from Europe, while ASTM A681 P2 is defined under ASTM International, originating from United States.

As per chemical composition, EN 10088-1 X53CrSiMoVN16-2 vs ASTM A681 P2 is a 58.6% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 58.6%.

Frequently Compared With EN 10088-1 X53CrSiMoVN16-2:
EN 10088-1 1.4401 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo ASTM A959 .- GB/T 3280 06Cr19Ni10 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
58.6%
MECHANICAL MATCH
No shared data
OVERALL
58.6%
Specifications
Property EN 10088-1 X53CrSiMoVN16-2 ASTM A681 P2
Standard EN 10088-1:2023 ASTM A681:2008
Category Stainless Steel Tool & Die Steels
C (%) 0.45-0.60 <=0.10
Si (%) 1.30-1.70 0.10-0.40
Mn (%) <=0.80 0.10-0.40
P (%) <=0.030 <=0.030
S (%) <=0.010 <=0.030
Cr (%) 15.0-16.5 0.75-1.25
Mo (%) 0.20-0.40 0.15-0.40
Ni (%) <=0.40 0.10-0.50
V (%) 0.20-0.40 Not specified
N (%) 0.05-0.20 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X53CrSiMoVN16-2 ASTM A681 P2
Hardness Not specified <=100 HB
Condition Not specified Annealed (maximum Brinell hardness)
Typical Applications
EN 10088-1 X53CrSiMoVN16-2
Not documented
ASTM A681 P2
Injection mould cavities, die casting dies for zinc
Key Differences
Can EN 10088-1 X53CrSiMoVN16-2 Be Substituted With ASTM A681 P2?
EN 10088-1 X53CrSiMoVN16-2 and ASTM A681 P2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
EN 10088-1 X53CrSiMoVN16-2
No active listings currently.
ASTM A681 P2
Round Bar → (3 listings)
Diameter: 80–80 mm (3.15–3.15 in)
Length: 2700–3900 mm (106.3–153.54 in)
On M-EX Right Now
EN 10088-1 X53CrSiMoVN16-2
0 active listings and RFQs →
ASTM A681 P2
3 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X53CrSiMoVN16-2 and ASTM A681 P2?
Different category: EN 10088-1 X53CrSiMoVN16-2 is Stainless Steel, ASTM A681 P2 is Tool & Die Steels. EN 10088-1 X53CrSiMoVN16-2 specifies V, N which are not specified for ASTM A681 P2.
Can EN 10088-1 X53CrSiMoVN16-2 be substituted with ASTM A681 P2?
EN 10088-1 X53CrSiMoVN16-2 and ASTM A681 P2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.