Post Stock Login Register

EN 10088-1 X5CrNiCu19-6-2 vs EN 10088-1 X5CrNi18-10

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

EN 10088-1 X5CrNiCu19-6-2 (EN 10088-1:2023) and EN 10088-1 X5CrNi18-10 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X5CrNiCu19-6-2 is defined under European Standard (EN), originating from Europe, while EN 10088-1 X5CrNi18-10 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10088-1 X5CrNiCu19-6-2 vs EN 10088-1 X5CrNi18-10 is a 70.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With EN 10088-1 X5CrNiCu19-6-2:
ASTM A959 .- GOST 5632 06Kh23N28 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr13H GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
70.9%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property EN 10088-1 X5CrNiCu19-6-2 EN 10088-1 X5CrNi18-10
Standard EN 10088-1:2023 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) 0.030-0.08 <=0.07
Si (%) <=0.50 <=1.00
Mn (%) 1.50-4.0 <=2.00
P (%) <=0.045 <=0.045
S (%) <=0.015 <=0.015
Cr (%) 18.0-19.0 17.5-19.5
Ni (%) 5.5-6.9 8.0-10.5
N (%) 0.030-0.11 <=0.10
Cu (%) 1.30-2.00 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
EN 10088-1 X5CrNiCu19-6-2
Not documented
EN 10088-1 X5CrNi18-10
Food, chemical, architectural applications
Key Differences
Can EN 10088-1 X5CrNiCu19-6-2 Be Substituted With EN 10088-1 X5CrNi18-10?
EN 10088-1 X5CrNiCu19-6-2 and EN 10088-1 X5CrNi18-10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
EN 10088-1 X5CrNiCu19-6-2
No active listings currently.
EN 10088-1 X5CrNi18-10
Sheet → (3 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2500–3900 mm (98.43–153.54 in)
On M-EX Right Now
EN 10088-1 X5CrNiCu19-6-2
0 active listings and RFQs →
EN 10088-1 X5CrNi18-10
3 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X5CrNiCu19-6-2 and EN 10088-1 X5CrNi18-10?
EN 10088-1 X5CrNiCu19-6-2 specifies Cu which is not specified for EN 10088-1 X5CrNi18-10.
Can EN 10088-1 X5CrNiCu19-6-2 be substituted with EN 10088-1 X5CrNi18-10?
EN 10088-1 X5CrNiCu19-6-2 and EN 10088-1 X5CrNi18-10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.