Post Stock Login Register

EN 10088-1 X5CrNiMnMoNNbV22-12-5-2 vs IS 6603 X04Cr17Ni12Mo2

Related Material — 60.7% match based on chemical composition and mechanical property overlap.

EN 10088-1 X5CrNiMnMoNNbV22-12-5-2 (EN 10088-1:2023) and IS 6603 X04Cr17Ni12Mo2 (IS 6603:2024) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X5CrNiMnMoNNbV22-12-5-2 is defined under European Standard (EN), originating from Europe, while IS 6603 X04Cr17Ni12Mo2 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, EN 10088-1 X5CrNiMnMoNNbV22-12-5-2 vs IS 6603 X04Cr17Ni12Mo2 is a 60.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 60.7%.

Frequently Compared With EN 10088-1 X5CrNiMnMoNNbV22-12-5-2:
IS 1570 (Part 7) 12Cr12MoH EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr13H ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
60.7%
MECHANICAL MATCH
No shared data
OVERALL
60.7%
Specifications
Property EN 10088-1 X5CrNiMnMoNNbV22-12-5-2 IS 6603 X04Cr17Ni12Mo2
Standard EN 10088-1:2023 IS 6603:2024
Category Stainless Steel Stainless Steel
C (%) <=0.060 <=0.07
Si (%) <=1.00 <=1.00
Mn (%) 4.0-6.0 <=2.00
P (%) <=0.045 <=0.045
S (%) <=0.030 <=0.030
Cr (%) 20.5-23.5 16.0-18.0
Mo (%) 1.5-3.0 2.00-3.00
Ni (%) 11.5-13.5 10.0-13.0
N (%) 0.20-0.40 <=0.10
Nb (%) 0.10-0.30 Not specified
V (%) 0.10-0.30 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X5CrNiMnMoNNbV22-12-5-2 IS 6603 X04Cr17Ni12Mo2
Tensile Strength Not specified 520-720 MPa
Yield Strength Not specified >=205 MPa
Elongation Not specified >=40%
Condition Not specified Solution annealed, conditions 1C, 1E, 1D, 1X, 1G and 2D, thickness or diameter up to 160 mm; Yield Strength is Rp0.2, Elongation is A (longitudinal)
Typical Applications
EN 10088-1 X5CrNiMnMoNNbV22-12-5-2
Not documented
IS 6603 X04Cr17Ni12Mo2
General purposes, semi-finished products, bars, wire rods and bright bars
Key Differences
Can EN 10088-1 X5CrNiMnMoNNbV22-12-5-2 Be Substituted With IS 6603 X04Cr17Ni12Mo2?
EN 10088-1 X5CrNiMnMoNNbV22-12-5-2 and IS 6603 X04Cr17Ni12Mo2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10088-1 X5CrNiMnMoNNbV22-12-5-2
0 active listings and RFQs →
IS 6603 X04Cr17Ni12Mo2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X5CrNiMnMoNNbV22-12-5-2 and IS 6603 X04Cr17Ni12Mo2?
EN 10088-1 X5CrNiMnMoNNbV22-12-5-2 specifies Nb, V which are not specified for IS 6603 X04Cr17Ni12Mo2.
Can EN 10088-1 X5CrNiMnMoNNbV22-12-5-2 be substituted with IS 6603 X04Cr17Ni12Mo2?
EN 10088-1 X5CrNiMnMoNNbV22-12-5-2 and IS 6603 X04Cr17Ni12Mo2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.