Post Stock Login Register

EN 10088-1 X5CrNiMoCuNb14-5 vs IS 6603 X05Cr16Ni4CuNb

Related Material — 66.2% match based on chemical composition and mechanical property overlap.

EN 10088-1 X5CrNiMoCuNb14-5 (EN 10088-1:2023) and IS 6603 X05Cr16Ni4CuNb (IS 6603:2024) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X5CrNiMoCuNb14-5 is defined under European Standard (EN), originating from Europe, while IS 6603 X05Cr16Ni4CuNb is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, EN 10088-1 X5CrNiMoCuNb14-5 vs IS 6603 X05Cr16Ni4CuNb is a 66.2% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 66.2%.

Frequently Compared With EN 10088-1 X5CrNiMoCuNb14-5:
EN 10088-1 1.4401 GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4845 ASTM A959 .- IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr13H GOST 5632 08X18H10 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
66.2%
MECHANICAL MATCH
No shared data
OVERALL
66.2%
Specifications
Property EN 10088-1 X5CrNiMoCuNb14-5 IS 6603 X05Cr16Ni4CuNb
Standard EN 10088-1:2023 IS 6603:2024
Category Stainless Steel Stainless Steel
C (%) <=0.07 <=0.07
Si (%) <=0.70 <=0.70
Mn (%) <=1.00 <=1.50
P (%) <=0.040 <=0.040
S (%) <=0.015 <=0.030
Cr (%) 13.0-15.0 15.0-17.0
Mo (%) 1.20-2.00 <=0.60
Ni (%) 5.0-6.0 3.0-5.0
Cu (%) 1.20-2.00 3.0-5.0
Nb (%) 0.15-0.60 <=0.45
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X5CrNiMoCuNb14-5 IS 6603 X05Cr16Ni4CuNb
Tensile Strength Not specified <=1200 MPa
Hardness Not specified <=363 HB
Condition Not specified Solution annealed (+AT), conditions 1C, 1E, 1D, 1X, 1G and 2D; hardness as printed
Typical Applications
EN 10088-1 X5CrNiMoCuNb14-5
Not documented
IS 6603 X05Cr16Ni4CuNb
General purposes, semi-finished products, bars, wire rods and bright bars
Can EN 10088-1 X5CrNiMoCuNb14-5 Be Substituted With IS 6603 X05Cr16Ni4CuNb?
EN 10088-1 X5CrNiMoCuNb14-5 and IS 6603 X05Cr16Ni4CuNb share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10088-1 X5CrNiMoCuNb14-5
0 active listings and RFQs →
IS 6603 X05Cr16Ni4CuNb
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X5CrNiMoCuNb14-5 and IS 6603 X05Cr16Ni4CuNb?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10088-1 X5CrNiMoCuNb14-5 be substituted with IS 6603 X05Cr16Ni4CuNb?
EN 10088-1 X5CrNiMoCuNb14-5 and IS 6603 X05Cr16Ni4CuNb share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.