Post Stock Login Register

EN 10088-1 X5CrNiMoTi15-2 vs ASTM A276/A276M S42010

Related Material — 69.7% match based on chemical composition and mechanical property overlap.

EN 10088-1 X5CrNiMoTi15-2 (EN 10088-1:2023) and ASTM A276/A276M S42010 (ASTM A276/A276M:2017) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X5CrNiMoTi15-2 is defined under European Standard (EN), originating from Europe, while ASTM A276/A276M S42010 is defined under ASTM International, originating from United States.

As per chemical composition, EN 10088-1 X5CrNiMoTi15-2 vs ASTM A276/A276M S42010 is a 69.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.7%.

Frequently Compared With EN 10088-1 X5CrNiMoTi15-2:
ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
69.7%
MECHANICAL MATCH
No shared data
OVERALL
69.7%
Specifications
Property EN 10088-1 X5CrNiMoTi15-2 ASTM A276/A276M S42010
Standard EN 10088-1:2023 ASTM A276/A276M:2017
Category Stainless Steel Stainless Steel
C (%) <=0.08 0.15-0.30
Si (%) <=1.00 <=1.00
Mn (%) <=1.00 <=1.00
P (%) <=0.040 <=0.040
S (%) <=0.015 <=0.030
Cr (%) 13.5-15.5 13.5-15.0
Mo (%) 0.20-1.20 0.40-0.85
Ni (%) 1.00-2.50 0.35-0.85
Ti (%) 0.30-0.50 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X5CrNiMoTi15-2 ASTM A276/A276M S42010
Hardness Not specified <=235 HB
Condition Not specified Condition A (Annealed), hot-finished, all sizes (first row printed)
Typical Applications
EN 10088-1 X5CrNiMoTi15-2
Not documented
ASTM A276/A276M S42010
Stainless steel bars and shapes (hot-finished or cold-finished)
Key Differences
Can EN 10088-1 X5CrNiMoTi15-2 Be Substituted With ASTM A276/A276M S42010?
EN 10088-1 X5CrNiMoTi15-2 and ASTM A276/A276M S42010 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10088-1 X5CrNiMoTi15-2
0 active listings and RFQs →
ASTM A276/A276M S42010
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X5CrNiMoTi15-2 and ASTM A276/A276M S42010?
EN 10088-1 X5CrNiMoTi15-2 specifies Ti which is not specified for ASTM A276/A276M S42010.
Can EN 10088-1 X5CrNiMoTi15-2 be substituted with ASTM A276/A276M S42010?
EN 10088-1 X5CrNiMoTi15-2 and ASTM A276/A276M S42010 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.