Post Stock Login Register

EN 10088-1 X5CrNiMoTi15-2 vs JIS G4304 SUS434

Related Material — 68.8% match based on chemical composition and mechanical property overlap.

EN 10088-1 X5CrNiMoTi15-2 (EN 10088-1:2023) and JIS G4304 SUS434 (JIS G4304:2021) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X5CrNiMoTi15-2 is defined under European Standard (EN), originating from Europe, while JIS G4304 SUS434 is defined under Japanese Industrial Standards (JIS), originating from Japan.

As per chemical composition, EN 10088-1 X5CrNiMoTi15-2 vs JIS G4304 SUS434 is a 68.8% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 68.8%.

Frequently Compared With EN 10088-1 X5CrNiMoTi15-2:
GB/T 3280 06Cr19Ni10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 ASTM A959 .- GOST 5632 06Kh23N28 GOST 5632 08X18H10 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
68.8%
MECHANICAL MATCH
No shared data
OVERALL
68.8%
Specifications
Property EN 10088-1 X5CrNiMoTi15-2 JIS G4304 SUS434
Standard EN 10088-1:2023 JIS G4304:2021
Category Stainless Steel Stainless Steel
C (%) <=0.08 <=0.12
Si (%) <=1.00 <=1.00
Mn (%) <=1.00 <=1.00
P (%) <=0.040 <=0.040
S (%) <=0.015 <=0.030
Cr (%) 13.5-15.5 16.00-18.00
Mo (%) 0.20-1.20 0.75-1.25
Ni (%) 1.00-2.50 <=0.60
Ti (%) 0.30-0.50 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X5CrNiMoTi15-2 JIS G4304 SUS434
Tensile Strength Not specified >=450 MPa
Yield Strength Not specified >=205 MPa
Elongation Not specified >=22%
Hardness Not specified <=183 HB
Condition Not specified Annealed plate and strip; proof strength applies only when specified by the purchaser
Typical Applications
EN 10088-1 X5CrNiMoTi15-2
Not documented
JIS G4304 SUS434
Hot-rolled stainless steel plates and strips
Key Differences
Can EN 10088-1 X5CrNiMoTi15-2 Be Substituted With JIS G4304 SUS434?
EN 10088-1 X5CrNiMoTi15-2 and JIS G4304 SUS434 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10088-1 X5CrNiMoTi15-2
0 active listings and RFQs →
JIS G4304 SUS434
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X5CrNiMoTi15-2 and JIS G4304 SUS434?
EN 10088-1 X5CrNiMoTi15-2 specifies Ti which is not specified for JIS G4304 SUS434.
Can EN 10088-1 X5CrNiMoTi15-2 be substituted with JIS G4304 SUS434?
EN 10088-1 X5CrNiMoTi15-2 and JIS G4304 SUS434 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.