EN 10088-1 X65Cr13 vs IS 6603 X40Cr13

Close Alternative — 84.9% match based on chemical composition and mechanical property overlap.

EN 10088-1 X65Cr13 (EN 10088-1:2023) and IS 6603 X40Cr13 (IS 6603:2024) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X65Cr13 is defined under European Standard (EN), originating from Europe, while IS 6603 X40Cr13 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, EN 10088-1 X65Cr13 vs IS 6603 X40Cr13 is a 88.4% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 84.9%.

Frequently Compared With EN 10088-1 X65Cr13:
GOST 5632 08X18H10 GB/T 3280 06Cr19Ni10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr13H ASTM A959 .-
Match Breakdown
CHEMISTRY MATCH
88.4%
MECHANICAL MATCH
No shared data
OVERALL
84.9%
Specifications
Property EN 10088-1 X65Cr13 IS 6603 X40Cr13
Standard EN 10088-1:2023 IS 6603:2024
Category Stainless Steel Stainless Steel
C (%) 0.58-0.70 0.43-0.50
Si (%) <=1.00 <=1.00
Mn (%) <=1.00 <=1.50
P (%) <=0.040 <=0.040
S (%) <=0.015 <=0.030
Cr (%) 12.5-14.5 12.5-14.5
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X65Cr13 IS 6603 X40Cr13
Tensile Strength Not specified <=800 MPa
Hardness Not specified <=245 HB
Condition Not specified Soft annealed (+A), conditions 1C, 1E, 1D, 1X, 1G and 2D, all sizes; hardness as printed
Typical Applications
EN 10088-1 X65Cr13
Not documented
IS 6603 X40Cr13
General purposes, semi-finished products, bars, wire rods and bright bars
Can EN 10088-1 X65Cr13 Be Substituted With IS 6603 X40Cr13?
EN 10088-1 X65Cr13 and IS 6603 X40Cr13 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
EN 10088-1 X65Cr13
0 active listings and RFQs →
IS 6603 X40Cr13
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X65Cr13 and IS 6603 X40Cr13?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10088-1 X65Cr13 be substituted with IS 6603 X40Cr13?
EN 10088-1 X65Cr13 and IS 6603 X40Cr13 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.