Related Material — 69.9% match
based on chemical composition and mechanical property overlap.
EN 10088-1 X6CrMoS19-2 (EN 10088-1:2023) and ASTM A959 SS316 (ASTM A959:2011) are both steel grades.
Both fall under the Stainless Steel category.
EN 10088-1 X6CrMoS19-2 is defined under European Standard (EN), originating from Europe, while ASTM A959 SS316 is defined under ASTM International, originating from United States.
As per chemical composition, EN 10088-1 X6CrMoS19-2 vs ASTM A959 SS316 is a 74.8% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a related material overall at 69.9%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Can EN 10088-1 X6CrMoS19-2 Be Substituted With ASTM A959 SS316?
EN 10088-1 X6CrMoS19-2 and ASTM A959 SS316 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between EN 10088-1 X6CrMoS19-2 and ASTM A959 SS316?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10088-1 X6CrMoS19-2 be substituted with ASTM A959 SS316?
EN 10088-1 X6CrMoS19-2 and ASTM A959 SS316 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.