EN 10088-1 X6CrMoS19-2 vs IS 1570 (Part 7) 6Cr17Ni12Mo2H
Related Material — 69.9% match
based on chemical composition and mechanical property overlap.
EN 10088-1 X6CrMoS19-2 (EN 10088-1:2023) and IS 1570 (Part 7) 6Cr17Ni12Mo2H (IS 1570 (Part 7):1992) are both steel grades.
Both fall under the Stainless Steel category.
EN 10088-1 X6CrMoS19-2 is defined under European Standard (EN), originating from Europe, while IS 1570 (Part 7) 6Cr17Ni12Mo2H is defined under Bureau of Indian Standards (IS), originating from India.
As per chemical composition, EN 10088-1 X6CrMoS19-2 vs IS 1570 (Part 7) 6Cr17Ni12Mo2H is a 74.8% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a related material overall at 69.9%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
EN 10088-1 X6CrMoS19-2
IS 1570 (Part 7) 6Cr17Ni12Mo2H
Tensile Strength
Not specified
510-710 MPa
Yield Strength
Not specified
>=205 MPa (0.2 % proof stress)
Elongation
Not specified
>=30%
Condition
Not specified
Pipes, bars, forgings, plates, Q, thickness - (first row of Table 3)
Typical Applications
EN 10088-1 X6CrMoS19-2
Not documented
IS 1570 (Part 7) 6Cr17Ni12Mo2H
Boilers, pressure vessels, steam turbines, steam and water piping and other power plant equipment working at elevated temperature
Can EN 10088-1 X6CrMoS19-2 Be Substituted With IS 1570 (Part 7) 6Cr17Ni12Mo2H?
EN 10088-1 X6CrMoS19-2 and IS 1570 (Part 7) 6Cr17Ni12Mo2H share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between EN 10088-1 X6CrMoS19-2 and IS 1570 (Part 7) 6Cr17Ni12Mo2H?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10088-1 X6CrMoS19-2 be substituted with IS 1570 (Part 7) 6Cr17Ni12Mo2H?
EN 10088-1 X6CrMoS19-2 and IS 1570 (Part 7) 6Cr17Ni12Mo2H share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.