Close Alternative — 84.9% match
based on chemical composition and mechanical property overlap.
EN 10088-1 X6CrNi17-1 (EN 10088-1:2023) and BS 970 (Part 1) 430S17 (BS 970 (Part 1):1991) are both steel grades.
Both fall under the Stainless Steel category.
EN 10088-1 X6CrNi17-1 is defined under European Standard (EN), originating from Europe, while BS 970 (Part 1) 430S17 is defined under British Standards (BS), originating from United Kingdom.
As per chemical composition, EN 10088-1 X6CrNi17-1 vs BS 970 (Part 1) 430S17 is a 90.3% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a close alternative overall at 84.9%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
EN 10088-1 X6CrNi17-1
Not documented
BS 970 (Part 1) 430S17
Ferritic and martensitic stainless and heat resisting steel (section five)
Can EN 10088-1 X6CrNi17-1 Be Substituted With BS 970 (Part 1) 430S17?
EN 10088-1 X6CrNi17-1 and BS 970 (Part 1) 430S17 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
What is the difference between EN 10088-1 X6CrNi17-1 and BS 970 (Part 1) 430S17?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10088-1 X6CrNi17-1 be substituted with BS 970 (Part 1) 430S17?
EN 10088-1 X6CrNi17-1 and BS 970 (Part 1) 430S17 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.