Post Stock Login Register

EN 10088-1 X6CrNiMo17-13-2 vs EN 10088-1 X6CrNiMoTiB17-13

Strong Match — 92.2% match based on chemical composition and mechanical property overlap.

EN 10088-1 X6CrNiMo17-13-2 (EN 10088-1:2023) and EN 10088-1 X6CrNiMoTiB17-13 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X6CrNiMo17-13-2 is defined under European Standard (EN), originating from Europe, while EN 10088-1 X6CrNiMoTiB17-13 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10088-1 X6CrNiMo17-13-2 vs EN 10088-1 X6CrNiMoTiB17-13 is a 92.2% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 92.2%.

Frequently Compared With EN 10088-1 X6CrNiMo17-13-2:
ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
92.2%
MECHANICAL MATCH
No shared data
OVERALL
92.2%
Specifications
Property EN 10088-1 X6CrNiMo17-13-2 EN 10088-1 X6CrNiMoTiB17-13
Standard EN 10088-1:2023 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) 0.04-0.08 0.04-0.08
Si (%) <=0.75 <=0.75
Mn (%) <=2.00 <=2.00
P (%) <=0.035 <=0.035
S (%) <=0.015 <=0.015
Cr (%) 16.0-18.0 16.0-18.0
Mo (%) 2.00-2.50 2.00-2.50
Ni (%) 12.0-14.0 12.0-14.0
N (%) <=0.10 Not specified
B (%) Not specified 0.0015-0.0060
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Key Differences
Can EN 10088-1 X6CrNiMo17-13-2 Be Substituted With EN 10088-1 X6CrNiMoTiB17-13?
EN 10088-1 X6CrNiMo17-13-2 and EN 10088-1 X6CrNiMoTiB17-13 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X6CrNiMoTiB17-13 is often considered as a substitute for EN 10088-1 X6CrNiMo17-13-2 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
EN 10088-1 X6CrNiMo17-13-2
0 active listings and RFQs →
EN 10088-1 X6CrNiMoTiB17-13
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X6CrNiMo17-13-2 and EN 10088-1 X6CrNiMoTiB17-13?
EN 10088-1 X6CrNiMo17-13-2 specifies N which is not specified for EN 10088-1 X6CrNiMoTiB17-13. EN 10088-1 X6CrNiMoTiB17-13 specifies B which is not specified for EN 10088-1 X6CrNiMo17-13-2.
Can EN 10088-1 X6CrNiMo17-13-2 be substituted with EN 10088-1 X6CrNiMoTiB17-13?
EN 10088-1 X6CrNiMo17-13-2 and EN 10088-1 X6CrNiMoTiB17-13 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X6CrNiMoTiB17-13 is often considered as a substitute for EN 10088-1 X6CrNiMo17-13-2 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.