Post Stock Login Register

EN 10088-1 X6CrNiSiNCe19-10 vs ASTM A959 304N

Close Alternative — 80% match based on chemical composition and mechanical property overlap.

EN 10088-1 X6CrNiSiNCe19-10 (EN 10088-1:2023) and ASTM A959 304N (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X6CrNiSiNCe19-10 is defined under European Standard (EN), originating from Europe, while ASTM A959 304N is defined under ASTM International, originating from United States.

As per chemical composition, EN 10088-1 X6CrNiSiNCe19-10 vs ASTM A959 304N is a 80% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 80%.

Frequently Compared With EN 10088-1 X6CrNiSiNCe19-10:
EN 10088-1 1.4006 ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
80%
MECHANICAL MATCH
No shared data
OVERALL
80%
Specifications
Property EN 10088-1 X6CrNiSiNCe19-10 ASTM A959 304N
Standard EN 10088-1:2023 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) 0.04-0.08 <=0.08
Si (%) 1.00-2.00 <=1.00
Mn (%) <=1.00 <=2.00
P (%) <=0.045 <=0.045
S (%) <=0.015 <=0.030
Cr (%) 18.0-20.0 18.0-20.0
Ni (%) 9.0-11.0 8.0-11.0
N (%) 0.12-0.20 0.10-0.16
Ce (%) 0.03-0.08 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
EN 10088-1 X6CrNiSiNCe19-10
Not documented
ASTM A959 304N
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can EN 10088-1 X6CrNiSiNCe19-10 Be Substituted With ASTM A959 304N?
EN 10088-1 X6CrNiSiNCe19-10 and ASTM A959 304N are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
EN 10088-1 X6CrNiSiNCe19-10
0 active listings and RFQs →
ASTM A959 304N
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X6CrNiSiNCe19-10 and ASTM A959 304N?
EN 10088-1 X6CrNiSiNCe19-10 specifies Ce which is not specified for ASTM A959 304N.
Can EN 10088-1 X6CrNiSiNCe19-10 be substituted with ASTM A959 304N?
EN 10088-1 X6CrNiSiNCe19-10 and ASTM A959 304N are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.