Post Stock Login Register

EN 10088-1 X6CrNiTiB18-10 vs GB/T 3280 06Cr19Ni10

Close Alternative — 78.9% match based on chemical composition and mechanical property overlap.

EN 10088-1 X6CrNiTiB18-10 (EN 10088-1:2023) and GB/T 3280 06Cr19Ni10 (GB/T 3280-2015) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X6CrNiTiB18-10 is defined under European Standard (EN), originating from Europe, while GB/T 3280 06Cr19Ni10 is defined under Guobiao Standards (GB/T), originating from China.

As per chemical composition, EN 10088-1 X6CrNiTiB18-10 vs GB/T 3280 06Cr19Ni10 is a 78.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 78.9%.

Frequently Compared With EN 10088-1 X6CrNiTiB18-10:
GOST 5632 06Kh23N28 ASTM A959 .- EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo GOST 5632 08X18H10 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr13H
Match Breakdown
CHEMISTRY MATCH
78.9%
MECHANICAL MATCH
No shared data
OVERALL
78.9%
Specifications
Property EN 10088-1 X6CrNiTiB18-10 GB/T 3280 06Cr19Ni10
Standard EN 10088-1:2023 GB/T 3280-2015
Category Stainless Steel Stainless Steel
C (%) 0.04-0.08 0.08 max
Si (%) <=1.00 1.00 max
Mn (%) <=2.00 2.00 max
P (%) <=0.035 0.045 max
S (%) <=0.015 0.030 max
Cr (%) 17.0-19.0 18.00-20.00
Ni (%) 9.0-12.0 8.00-11.00
B (%) 0.0015-0.0050 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X6CrNiTiB18-10 GB/T 3280 06Cr19Ni10
Tensile Strength Not specified 520-720 MPa
Yield Strength Not specified 205-310 MPa
Elongation Not specified 40-60%
Hardness Not specified 187 HB max
Typical Applications
EN 10088-1 X6CrNiTiB18-10
Not documented
GB/T 3280 06Cr19Ni10
Used for kitchen equipment, food processing machinery, chemical tanks, piping, architectural panels, and fasteners.
Key Differences
Can EN 10088-1 X6CrNiTiB18-10 Be Substituted With GB/T 3280 06Cr19Ni10?
EN 10088-1 X6CrNiTiB18-10 and GB/T 3280 06Cr19Ni10 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
Forms & Sizes Available on M-EX
EN 10088-1 X6CrNiTiB18-10
No active listings currently.
GB/T 3280 06Cr19Ni10
Sheet → (2 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2900–3300 mm (114.17–129.92 in)
On M-EX Right Now
EN 10088-1 X6CrNiTiB18-10
0 active listings and RFQs →
GB/T 3280 06Cr19Ni10
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X6CrNiTiB18-10 and GB/T 3280 06Cr19Ni10?
EN 10088-1 X6CrNiTiB18-10 specifies B which is not specified for GB/T 3280 06Cr19Ni10.
Can EN 10088-1 X6CrNiTiB18-10 be substituted with GB/T 3280 06Cr19Ni10?
EN 10088-1 X6CrNiTiB18-10 and GB/T 3280 06Cr19Ni10 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.