Post Stock Login Register

EN 10088-1 X6CrNiWNbN16-16 vs EN 10088-1 X7CrNiNb18-10

Related Material — 67.5% match based on chemical composition and mechanical property overlap.

EN 10088-1 X6CrNiWNbN16-16 (EN 10088-1:2023) and EN 10088-1 X7CrNiNb18-10 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X6CrNiWNbN16-16 is defined under European Standard (EN), originating from Europe, while EN 10088-1 X7CrNiNb18-10 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10088-1 X6CrNiWNbN16-16 vs EN 10088-1 X7CrNiNb18-10 is a 67.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 67.5%.

Frequently Compared With EN 10088-1 X6CrNiWNbN16-16:
ASTM A959 .- GOST 5632 06Kh23N28 GOST 5632 08X18H10 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo GB/T 3280 06Cr19Ni10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
67.5%
MECHANICAL MATCH
No shared data
OVERALL
67.5%
Specifications
Property EN 10088-1 X6CrNiWNbN16-16 EN 10088-1 X7CrNiNb18-10
Standard EN 10088-1:2023 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) 0.04-0.10 0.04-0.10
Si (%) 0.30-0.60 <=1.00
Mn (%) <=1.50 <=2.00
P (%) <=0.035 <=0.045
S (%) <=0.015 <=0.015
Cr (%) 15.5-17.5 17.0-19.0
Ni (%) 15.5-17.5 9.0-12.0
N (%) 0.06-0.14 Not specified
W (%) 2.50-3.5 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Key Differences
Can EN 10088-1 X6CrNiWNbN16-16 Be Substituted With EN 10088-1 X7CrNiNb18-10?
EN 10088-1 X6CrNiWNbN16-16 and EN 10088-1 X7CrNiNb18-10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10088-1 X6CrNiWNbN16-16
0 active listings and RFQs →
EN 10088-1 X7CrNiNb18-10
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X6CrNiWNbN16-16 and EN 10088-1 X7CrNiNb18-10?
EN 10088-1 X6CrNiWNbN16-16 specifies N, W which are not specified for EN 10088-1 X7CrNiNb18-10.
Can EN 10088-1 X6CrNiWNbN16-16 be substituted with EN 10088-1 X7CrNiNb18-10?
EN 10088-1 X6CrNiWNbN16-16 and EN 10088-1 X7CrNiNb18-10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.