Post Stock Login Register

EN 10088-1 X8CrMnCuN17-8-3 vs EN 10088-1 X10CrNi18-8

Related Material — 65.8% match based on chemical composition and mechanical property overlap.

EN 10088-1 X8CrMnCuN17-8-3 (EN 10088-1:2023) and EN 10088-1 X10CrNi18-8 (EN 10088-1:2023) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X8CrMnCuN17-8-3 is defined under European Standard (EN), originating from Europe, while EN 10088-1 X10CrNi18-8 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10088-1 X8CrMnCuN17-8-3 vs EN 10088-1 X10CrNi18-8 is a 65.8% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 65.8%.

Frequently Compared With EN 10088-1 X8CrMnCuN17-8-3:
EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
65.8%
MECHANICAL MATCH
No shared data
OVERALL
65.8%
Specifications
Property EN 10088-1 X8CrMnCuN17-8-3 EN 10088-1 X10CrNi18-8
Standard EN 10088-1:2023 EN 10088-1:2023
Category Stainless Steel Stainless Steel
C (%) <=0.10 0.030-0.15
Si (%) <=2.00 <=2.00
Mn (%) 6.5-9.0 <=2.00
P (%) <=0.040 <=0.045
S (%) <=0.030 <=0.015
Cr (%) 15.0-18.0 16.0-19.0
Mo (%) <=1.00 <=0.80
Ni (%) <=3.00 6.0-9.5
N (%) 0.10-0.30 <=0.10
Cu (%) 2.00-3.5 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Key Differences
Can EN 10088-1 X8CrMnCuN17-8-3 Be Substituted With EN 10088-1 X10CrNi18-8?
EN 10088-1 X8CrMnCuN17-8-3 and EN 10088-1 X10CrNi18-8 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10088-1 X8CrMnCuN17-8-3
0 active listings and RFQs →
EN 10088-1 X10CrNi18-8
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X8CrMnCuN17-8-3 and EN 10088-1 X10CrNi18-8?
EN 10088-1 X8CrMnCuN17-8-3 specifies Cu which is not specified for EN 10088-1 X10CrNi18-8.
Can EN 10088-1 X8CrMnCuN17-8-3 be substituted with EN 10088-1 X10CrNi18-8?
EN 10088-1 X8CrMnCuN17-8-3 and EN 10088-1 X10CrNi18-8 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.