Post Stock Login Register

EN 10088-1 X8CrMnCuN17-8-3 vs IS 6603 X15Cr18Ni8

Related Material — 68.9% match based on chemical composition and mechanical property overlap.

EN 10088-1 X8CrMnCuN17-8-3 (EN 10088-1:2023) and IS 6603 X15Cr18Ni8 (IS 6603:2024) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X8CrMnCuN17-8-3 is defined under European Standard (EN), originating from Europe, while IS 6603 X15Cr18Ni8 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, EN 10088-1 X8CrMnCuN17-8-3 vs IS 6603 X15Cr18Ni8 is a 68.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 68.9%.

Frequently Compared With EN 10088-1 X8CrMnCuN17-8-3:
EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
68.9%
MECHANICAL MATCH
No shared data
OVERALL
68.9%
Specifications
Property EN 10088-1 X8CrMnCuN17-8-3 IS 6603 X15Cr18Ni8
Standard EN 10088-1:2023 IS 6603:2024
Category Stainless Steel Stainless Steel
C (%) <=0.10 <=0.15
Si (%) <=2.00 <=2.00
Mn (%) 6.5-9.0 <=2.00
P (%) <=0.040 <=0.045
S (%) <=0.030 <=0.030
Cr (%) 15.0-18.0 16.0-19.0
Mo (%) <=1.00 <=0.80
Ni (%) <=3.00 6.0-9.5
N (%) 0.10-0.30 <=0.10
Cu (%) 2.00-3.5 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X8CrMnCuN17-8-3 IS 6603 X15Cr18Ni8
Tensile Strength Not specified 500-700 MPa
Condition Not specified Solution annealed, conditions 1C, 1E, 1D, 1X, 1G and 2D, rod only; Yield Strength is Rp0.2, Elongation is A (longitudinal)
Typical Applications
EN 10088-1 X8CrMnCuN17-8-3
Not documented
IS 6603 X15Cr18Ni8
General purposes, semi-finished products, bars, wire rods and bright bars
Key Differences
Can EN 10088-1 X8CrMnCuN17-8-3 Be Substituted With IS 6603 X15Cr18Ni8?
EN 10088-1 X8CrMnCuN17-8-3 and IS 6603 X15Cr18Ni8 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10088-1 X8CrMnCuN17-8-3
0 active listings and RFQs →
IS 6603 X15Cr18Ni8
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X8CrMnCuN17-8-3 and IS 6603 X15Cr18Ni8?
EN 10088-1 X8CrMnCuN17-8-3 specifies Cu which is not specified for IS 6603 X15Cr18Ni8.
Can EN 10088-1 X8CrMnCuN17-8-3 be substituted with IS 6603 X15Cr18Ni8?
EN 10088-1 X8CrMnCuN17-8-3 and IS 6603 X15Cr18Ni8 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.