Post Stock Login Register

EN 10088-1 X8CrNiMoNb16-16 vs EN 10088-1 X8CrNiMoVNb16-13

Close Alternative — 72.2% match based on chemical composition and mechanical property overlap.

EN 10088-1 X8CrNiMoNb16-16 (EN 10088-1:2023) and EN 10088-1 X8CrNiMoVNb16-13 (EN 10088-1:2023) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X8CrNiMoNb16-16 is defined under European Standard (EN), originating from Europe, while EN 10088-1 X8CrNiMoVNb16-13 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10088-1 X8CrNiMoNb16-16 vs EN 10088-1 X8CrNiMoVNb16-13 is a 72.2% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 72.2%.

Frequently Compared With EN 10088-1 X8CrNiMoNb16-16:
EN 10088-1 1.4006 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12Ni2Mo ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4301 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
72.2%
MECHANICAL MATCH
No shared data
OVERALL
72.2%
Specifications
Property EN 10088-1 X8CrNiMoNb16-16 EN 10088-1 X8CrNiMoVNb16-13
Standard EN 10088-1:2023 EN 10088-1:2023
Category Stainless Steel Stainless Steel
C (%) 0.04-0.10 0.04-0.10
Si (%) 0.30-0.60 0.30-0.60
Mn (%) <=1.50 <=1.50
P (%) <=0.035 <=0.035
S (%) <=0.015 <=0.015
Cr (%) 15.5-17.5 15.5-17.5
Mo (%) 1.60-2.00 1.10-1.50
Ni (%) 15.5-17.5 12.5-14.5
N (%) Not specified 0.06-0.14
V (%) Not specified 0.60-0.85
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Key Differences
Can EN 10088-1 X8CrNiMoNb16-16 Be Substituted With EN 10088-1 X8CrNiMoVNb16-13?
EN 10088-1 X8CrNiMoNb16-16 and EN 10088-1 X8CrNiMoVNb16-13 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
EN 10088-1 X8CrNiMoNb16-16
0 active listings and RFQs →
EN 10088-1 X8CrNiMoVNb16-13
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X8CrNiMoNb16-16 and EN 10088-1 X8CrNiMoVNb16-13?
EN 10088-1 X8CrNiMoVNb16-13 specifies N, V which are not specified for EN 10088-1 X8CrNiMoNb16-16.
Can EN 10088-1 X8CrNiMoNb16-16 be substituted with EN 10088-1 X8CrNiMoVNb16-13?
EN 10088-1 X8CrNiMoNb16-16 and EN 10088-1 X8CrNiMoVNb16-13 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.