Post Stock Login Register

EN 10088-1 X8CrNiMoVNb16-13 vs IS 1570 (Part 7) 12Cr12Ni2Mo

Minimal Match — 46% match based on chemical composition and mechanical property overlap.

EN 10088-1 X8CrNiMoVNb16-13 (EN 10088-1:2023) and IS 1570 (Part 7) 12Cr12Ni2Mo (IS 1570 (Part 7):1992) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X8CrNiMoVNb16-13 is defined under European Standard (EN), originating from Europe, while IS 1570 (Part 7) 12Cr12Ni2Mo is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, EN 10088-1 X8CrNiMoVNb16-13 vs IS 1570 (Part 7) 12Cr12Ni2Mo is a 46% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a minimal match overall at 46%.

Frequently Compared With EN 10088-1 X8CrNiMoVNb16-13:
ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr13H
Match Breakdown
CHEMISTRY MATCH
46%
MECHANICAL MATCH
No shared data
OVERALL
46%
Specifications
Property EN 10088-1 X8CrNiMoVNb16-13 IS 1570 (Part 7) 12Cr12Ni2Mo
Standard EN 10088-1:2023 IS 1570 (Part 7):1992
Category Stainless Steel Stainless Steel
C (%) 0.04-0.10 0.08-0.16
Si (%) 0.30-0.60 <=0.35
Mn (%) <=1.50 0.50-0.90
P (%) <=0.035 <=0.040
S (%) <=0.015 <=0.030
Cr (%) 15.5-17.5 11.0-12.5
Mo (%) 1.10-1.50 1.5-2.00
Ni (%) 12.5-14.5 2.0-3.0
N (%) 0.06-0.14 0.02-0.04
V (%) 0.60-0.85 0.25-0.40
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X8CrNiMoVNb16-13 IS 1570 (Part 7) 12Cr12Ni2Mo
Tensile Strength Not specified 930-1130 MPa
Yield Strength Not specified >=785 MPa (0.2 % proof stress)
Elongation Not specified >=14%
Condition Not specified Bars, forgings, Q+T, thickness up to 150 (first row of Table 3)
Typical Applications
EN 10088-1 X8CrNiMoVNb16-13
Not documented
IS 1570 (Part 7) 12Cr12Ni2Mo
Boilers, pressure vessels, steam turbines, steam and water piping and other power plant equipment working at elevated temperature
Can EN 10088-1 X8CrNiMoVNb16-13 Be Substituted With IS 1570 (Part 7) 12Cr12Ni2Mo?
EN 10088-1 X8CrNiMoVNb16-13 and IS 1570 (Part 7) 12Cr12Ni2Mo share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10088-1 X8CrNiMoVNb16-13
0 active listings and RFQs →
IS 1570 (Part 7) 12Cr12Ni2Mo
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X8CrNiMoVNb16-13 and IS 1570 (Part 7) 12Cr12Ni2Mo?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10088-1 X8CrNiMoVNb16-13 be substituted with IS 1570 (Part 7) 12Cr12Ni2Mo?
EN 10088-1 X8CrNiMoVNb16-13 and IS 1570 (Part 7) 12Cr12Ni2Mo share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.