Post Stock Login Register

EN 10088-1 X5CrNiMo17-12-2 vs IS 1570 (Part 7) 12Cr12MoH

Related Material — 55.9% match based on chemical composition and mechanical property overlap.

EN 10088-1 X5CrNiMo17-12-2 (EN 10088-1:2014) and IS 1570 (Part 7) 12Cr12MoH (IS 1570 (Part 7):1992) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X5CrNiMo17-12-2 is typically used for marine, chemical, pharmaceutical equipment, while IS 1570 (Part 7) 12Cr12MoH is commonly used for boilers, pressure vessels, steam turbines, steam and water piping and other power plant equipment working at elevated temperature. EN 10088-1 X5CrNiMo17-12-2 is defined under European Standard (EN), originating from Europe, while IS 1570 (Part 7) 12Cr12MoH is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, EN 10088-1 X5CrNiMo17-12-2 vs IS 1570 (Part 7) 12Cr12MoH is a 55.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 55.9%.

Frequently Compared With EN 10088-1 X5CrNiMo17-12-2:
EN 10088-1 1.4401 GOST 5632 12Kh13 EN 10088-1 1.4845 EN 10088-1 1.4006 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4301 GB/T 3280 06Cr19Ni10 ASTM A959 .- IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
55.9%
MECHANICAL MATCH
No shared data
OVERALL
55.9%
Specifications
Property EN 10088-1 X5CrNiMo17-12-2 IS 1570 (Part 7) 12Cr12MoH
Standard EN 10088-1:2014 IS 1570 (Part 7):1992
Category Stainless Steel Stainless Steel
C (%) <=0.07 0.08-0.16
Si (%) <=1.00 <=0.60
Mn (%) <=2.00 0.40-1.00
P (%) <=0.045 <=0.040
S (%) <=0.015 <=0.035
Cr (%) 16.5-18.5 11.5-13.00
Mo (%) 2.00-2.50 0.40-0.80
Ni (%) 10.0-13.0 <=1.0
N (%) <=0.10 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X5CrNiMo17-12-2 IS 1570 (Part 7) 12Cr12MoH
Tensile Strength Not specified 680-880 MPa
Yield Strength Not specified >=490 MPa (0.2 % proof stress)
Elongation Not specified >=20%
Condition Not specified Bars, forgings, Q+T, thickness up to 75 (first row of Table 3)
Typical Applications
EN 10088-1 X5CrNiMo17-12-2
Marine, chemical, pharmaceutical equipment
IS 1570 (Part 7) 12Cr12MoH
Boilers, pressure vessels, steam turbines, steam and water piping and other power plant equipment working at elevated temperature
Key Differences
Can EN 10088-1 X5CrNiMo17-12-2 Be Substituted With IS 1570 (Part 7) 12Cr12MoH?
EN 10088-1 X5CrNiMo17-12-2 and IS 1570 (Part 7) 12Cr12MoH share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
EN 10088-1 X5CrNiMo17-12-2
Sheet → (3 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 3200–5600 mm (125.98–220.47 in)
IS 1570 (Part 7) 12Cr12MoH
No active listings currently.
On M-EX Right Now
EN 10088-1 X5CrNiMo17-12-2
3 active listings and RFQs →
IS 1570 (Part 7) 12Cr12MoH
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X5CrNiMo17-12-2 and IS 1570 (Part 7) 12Cr12MoH?
EN 10088-1 X5CrNiMo17-12-2 specifies N which is not specified for IS 1570 (Part 7) 12Cr12MoH.
Can EN 10088-1 X5CrNiMo17-12-2 be substituted with IS 1570 (Part 7) 12Cr12MoH?
EN 10088-1 X5CrNiMo17-12-2 and IS 1570 (Part 7) 12Cr12MoH share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.