EN 10088-2:2014 X2CrNiN22-2 Steel: Specifications & Listings

EN 10088-2:2014 X2CrNiN22-2: X2CrNiN22-2: austenitic-ferritic (duplex) corrosion resisting stainless steel, material number 1.4062. Specified in EN 10088-2:2014.

Category: Stainless Steel
Grade Details
GradeEN 10088-2:2014 X2CrNiN22-2
Standard EN 10088-2:2014
ApplicationsGeneral purposes, hot or cold rolled sheet/plate and strip
Equivalent / Similar Grades
Grade Standard Region Live on M-EX
EN 10088-1 X2CrNiN22-2 EN 10088-1:2014 Europe (CEN) No activity yet
Grade ComparisonCompare With a Specific Grade →
Grade Standard Match
EN 10088-1 X2CrNiN22-2 EN 10088-1:2014 Strong Match
EN 10088-1 X2CrNiN22-2 EN 10088-1:2023 Strong Match
EN 10088-1 X2CrCuNiN23-2-2 EN 10088-1:2014 Close Alternative
EN 10088-1 X2CrCuNiN23-2-2 EN 10088-1:2023 Close Alternative
EN 10088-1 X2CrNiCuN23-4 EN 10088-1:2014 Close Alternative
ASTM A959 2304 ASTM A959:2011 Close Alternative
EN 10088-1 X2CrNiN23-4 EN 10088-1:2014 Close Alternative
EN 10088-1 X2CrNiN23-4 EN 10088-1:2023 Close Alternative
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C Si Mn P S Cr Mo Ni N
<=0.030 <=1.00 <=2.00 <=0.040 <=0.010 21.5-24.0 <=0.45 1.00-2.90 0.16-0.28
Mechanical Properties
Tensile Strength 700-900 MPa
Yield Strength >=530 MPa
Elongation >=20%
Condition Solution annealed (+AT), cold rolled strip, up to 6.4 mm thick; Yield Strength is Rp0.2 (transverse), Elongation is A80 for under 3 mm thick

More data from EN 10088-2:2014

From the standard
Mechanical properties by product form and thickness 3 product forms
Product formMax thickness (mm)Rp0.2 min (MPa)Rm (MPa)A80 min, under 3 mm thick (%)A min, 3 mm and over (%)
Cold rolled strip6.4530700 to 9002020
Hot rolled strip10480680 to 9003030
Hot rolled plate75450650 to 8503030
Solution annealed condition; proof strength is the minimum transverse value.
Source: EN 10088-2:2014, Table 8
Impact energy KV2 (ISO-V) 2 rows
Product formMax thickness (mm)KV2 longitudinal, min (J)KV2 transverse, min (J)
Hot rolled strip108080
Hot rolled plate758060
Applies to products more than 10 mm thick, ISO-V notch, room temperature.
Source: EN 10088-2:2014, Table 8
Proof strength at elevated temperature 4 temperatures
Temperature (deg C)Rp0.2 min (MPa)
100380
150350
200330
250315
Minimum values, solution annealed (+AT).
Source: EN 10088-2:2014, Table 13
Hot forming and solution annealing guideline temperatures
Hot forming temperature
1100 to 950 deg C
Cooling after hot forming
air
Heat treatment symbol
+AT
Solution annealing temperature
980 to 1100 deg C
Cooling after solution annealing
water, air
Informative guideline; cooling must be rapid enough to avoid precipitation.
Source: EN 10088-2:2014, Table A.2

Active EN 10088-2:2014 X2CrNiN22-2 Listings on M-EX (For Sale)

+ Create a Listing for this grade

No active EN 10088-2:2014 X2CrNiN22-2 listings at this time.

Register for Alerts

Buyer RFQs for EN 10088-2:2014 X2CrNiN22-2

+ Post an RFQ for this grade

No open buyer requirements for EN 10088-2:2014 X2CrNiN22-2 at this time.

Register for Alerts