Post Stock Login Register

EN 10088-2 X5CrNiCuNb16-4 vs EN 10088-1 X5CrNiMoCuNb14-5

Related Material — 67.6% match based on chemical composition and mechanical property overlap.

EN 10088-2 X5CrNiCuNb16-4 (EN 10088-2:2014) and EN 10088-1 X5CrNiMoCuNb14-5 (EN 10088-1:2023) are both steel grades. Both fall under the Stainless Steel category. EN 10088-2 X5CrNiCuNb16-4 is defined under European Standard (EN), originating from Europe, while EN 10088-1 X5CrNiMoCuNb14-5 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10088-2 X5CrNiCuNb16-4 vs EN 10088-1 X5CrNiMoCuNb14-5 is a 67.6% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 67.6%.

Frequently Compared With EN 10088-2 X5CrNiCuNb16-4:
ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
67.6%
MECHANICAL MATCH
No shared data
OVERALL
67.6%
Specifications
Property EN 10088-2 X5CrNiCuNb16-4 EN 10088-1 X5CrNiMoCuNb14-5
Standard EN 10088-2:2014 EN 10088-1:2023
Category Stainless Steel Stainless Steel
C (%) <=0.07 <=0.07
Si (%) <=0.70 <=0.70
Mn (%) <=1.50 <=1.00
P (%) <=0.040 <=0.040
S (%) <=0.015 <=0.015
Cr (%) 15.0-17.0 13.0-15.0
Mo (%) <=0.60 1.20-2.00
Ni (%) 3.0-5.0 5.0-6.0
Cu (%) 3.0-5.0 1.20-2.00
Nb (%) <=0.45 0.15-0.60
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-2 X5CrNiCuNb16-4 EN 10088-1 X5CrNiMoCuNb14-5
Tensile Strength <=1275 MPa Not specified
Elongation >=5% Not specified
Condition Solution annealed (+AT, delivery condition), cold rolled strip, up to 8 mm thick Not specified
Typical Applications
EN 10088-2 X5CrNiCuNb16-4
General purposes, hot or cold rolled sheet/plate and strip
EN 10088-1 X5CrNiMoCuNb14-5
Not documented
Can EN 10088-2 X5CrNiCuNb16-4 Be Substituted With EN 10088-1 X5CrNiMoCuNb14-5?
EN 10088-2 X5CrNiCuNb16-4 and EN 10088-1 X5CrNiMoCuNb14-5 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10088-2 X5CrNiCuNb16-4
0 active listings and RFQs →
EN 10088-1 X5CrNiMoCuNb14-5
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-2 X5CrNiCuNb16-4 and EN 10088-1 X5CrNiMoCuNb14-5?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10088-2 X5CrNiCuNb16-4 be substituted with EN 10088-1 X5CrNiMoCuNb14-5?
EN 10088-2 X5CrNiCuNb16-4 and EN 10088-1 X5CrNiMoCuNb14-5 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.