Post Stock Login Register

EN 10346 S450GD vs CSA G40.21 480W

Related Material — 65.7% match based on chemical composition and mechanical property overlap.

EN 10346 S450GD (EN 10346:2015) and CSA G40.21 480W (CSA G40.21-13 (R2023)) are both steel grades. Both fall under the Structural Steel category. EN 10346 S450GD is typically used for higher-strength continuous hot-dip galvanized structural steel strip/sheet; roll-formed and cold-formed high-strength structural sections, purlins, roofing and cladding requiring corrosion protection, while CSA G40.21 480W is commonly used for heavy cranes, offshore structures, high-rise building frames, pressure vessels, heavy mining equipment.. EN 10346 S450GD is defined under European Standard (EN), originating from Europe, while CSA G40.21 480W is defined under Canadian Standards Association (CSA), originating from Canada.

As per chemical composition, EN 10346 S450GD vs CSA G40.21 480W is a 98.6% match. As per mechanical properties, the match is 0%. Combined, this makes them a related material overall at 65.7%.

Frequently Compared With EN 10346 S450GD:
AS/NZS 1595 C450 CSA G40.21 260W CSA G40.21 400W GOST 19281 09G2S CSA G40.21 400A CSA G40.21 300W AS/NZS 3679.1 350 AS/NZS 3679.1 300 CSA G40.21 350W ASTM A1008 SS Grade 50 ASTM A572 Gr.65 ASTM A1008 SS Grade 80
Match Breakdown
CHEMISTRY MATCH
98.6%
MECHANICAL MATCH
0%
OVERALL
65.7%
Specifications
Property EN 10346 S450GD CSA G40.21 480W
Standard EN 10346:2015 CSA G40.21-13 (R2023)
Category Structural Steel Structural Steel
C (%) <=0.22 max 0.23
Mn (%) <=1.60 max 1.7
Si (%) <=0.50 max 0.5
P (%) <=0.040 max 0.035
S (%) <=0.040 max 0.035
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10346 S450GD CSA G40.21 480W
Tensile Strength 480 MPa min 590-790 MPa
Yield Strength 450 MPa min 480 MPa min
Elongation 12% min Not specified
Typical Applications
EN 10346 S450GD
Higher-strength continuous hot-dip galvanized structural steel strip/sheet; roll-formed and cold-formed high-strength structural sections, purlins, roofing and cladding requiring corrosion protection
CSA G40.21 480W
Heavy cranes, offshore structures, high-rise building frames, pressure vessels, heavy mining equipment.
Can EN 10346 S450GD Be Substituted With CSA G40.21 480W?
EN 10346 S450GD and CSA G40.21 480W share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
EN 10346 S450GD
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2800–3000 mm (110.24–118.11 in)
CSA G40.21 480W
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2900–3000 mm (114.17–118.11 in)
On M-EX Right Now
EN 10346 S450GD
2 active listings and RFQs →
CSA G40.21 480W
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10346 S450GD and CSA G40.21 480W?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10346 S450GD be substituted with CSA G40.21 480W?
EN 10346 S450GD and CSA G40.21 480W share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.