Post Stock Login Register

GB/T 1299 4Cr5MoSiV vs IS 1570 (Part 6) 70T3

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

GB/T 1299 4Cr5MoSiV (GB/T 1299-2014) and IS 1570 (Part 6) 70T3 (IS 1570 (Part 6):1996) are both steel grades. Both fall under the Tool & Die Steels category. GB/T 1299 4Cr5MoSiV is defined under Guobiao Standards (GB/T), originating from China, while IS 1570 (Part 6) 70T3 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, GB/T 1299 4Cr5MoSiV vs IS 1570 (Part 6) 70T3 is a 51.4% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With GB/T 1299 4Cr5MoSiV:
EN ISO 683-17 100Cr6 GB/T 1299 4Cr5MoSiV1 DIN EN ISO 4957 1.2344 GB/T 1299 3Cr2W8V GOST 5950 3H2W8F DIN EN ISO 4957 1.2379 EN ISO 4957 1.2316 GOST 5950 4H5MFS GOST 5950 4H5MFS1 AISI 52100 IS 1570 (Part 6) 133T3 IS 3748 103T3
Match Breakdown
CHEMISTRY MATCH
51.4%
MECHANICAL MATCH
No shared data
OVERALL
35%
Specifications
Property GB/T 1299 4Cr5MoSiV IS 1570 (Part 6) 70T3
Standard GB/T 1299-2014 IS 1570 (Part 6):1996
Category Tool & Die Steels Tool & Die Steels
C (%) 0.32–0.45 0.65-0.75
Si (%) 0.80–1.20 0.10-0.30
Mn (%) 0.20–0.50 <=0.40
Cr (%) 4.75–5.50 <=0.20
Mo (%) 1.10–1.60 Not specified
V (%) 0.30–0.60 Not specified
P (%) Not specified <=0.035
S (%) Not specified <=0.035
Cu (%) Not specified <=0.25
Ni (%) Not specified <=0.25
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GB/T 1299 4Cr5MoSiV IS 1570 (Part 6) 70T3
Hardness HRC (hardened) 40–54 Not specified
Hardness HB (annealed) ≤235 Not specified
Typical Applications
GB/T 1299 4Cr5MoSiV
Die casting dies, extrusion tooling
IS 1570 (Part 6) 70T3
Not documented
Key Differences
Can GB/T 1299 4Cr5MoSiV Be Substituted With IS 1570 (Part 6) 70T3?
GB/T 1299 4Cr5MoSiV and IS 1570 (Part 6) 70T3 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GB/T 1299 4Cr5MoSiV
Round Bar → (2 listings)
Diameter: 80–80 mm (3.15–3.15 in)
Length: 2500–2700 mm (98.43–106.3 in)
IS 1570 (Part 6) 70T3
No active listings currently.
On M-EX Right Now
GB/T 1299 4Cr5MoSiV
2 active listings and RFQs →
IS 1570 (Part 6) 70T3
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GB/T 1299 4Cr5MoSiV and IS 1570 (Part 6) 70T3?
GB/T 1299 4Cr5MoSiV specifies Mo, V which are not specified for IS 1570 (Part 6) 70T3. IS 1570 (Part 6) 70T3 specifies P, S, Cu, Ni which are not specified for GB/T 1299 4Cr5MoSiV.
Can GB/T 1299 4Cr5MoSiV be substituted with IS 1570 (Part 6) 70T3?
GB/T 1299 4Cr5MoSiV and IS 1570 (Part 6) 70T3 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.