Post Stock Login Register

GB/T 1299 Cr12Mo1V1 vs GB/T 1299 Cr12MoV

Related Material — 66.7% match based on chemical composition and mechanical property overlap.

GB/T 1299 Cr12Mo1V1 (GB/T 1299-2014) and GB/T 1299 Cr12MoV (GB/T 1299-2014) are both steel grades. Both fall under the Tool & Die Steels category. GB/T 1299 Cr12Mo1V1 is typically used for precision blanking dies, thread rolling dies, cold forming, while GB/T 1299 Cr12MoV is commonly used for blanking dies, forming dies, thread rolling dies, punches, shear blades, gauges, broaches, drawing dies. GB/T 1299 Cr12Mo1V1 is defined under Guobiao Standards (GB/T), originating from China, while GB/T 1299 Cr12MoV is defined under Guobiao Standards (GB/T), originating from China.

As per chemical composition, GB/T 1299 Cr12Mo1V1 vs GB/T 1299 Cr12MoV is a 100% match. As per mechanical properties, the match is 0%. Combined, this makes them a related material overall at 66.7%.

Frequently Compared With GB/T 1299 Cr12Mo1V1:
EN ISO 4957 1.2316 GOST 5950 3H2W8F GOST 5950 4H5MFS1 DIN EN ISO 4957 1.2379 GB/T 1299 3Cr2W8V GB/T 1299 4Cr5MoSiV1 EN ISO 683-17 100Cr6 DIN EN ISO 4957 1.2344 GB/T 1299 4Cr5MoSiV GOST 5950 4H5MFS AISI 52100 IS 1570 (Part 6) 103T3
Match Breakdown
CHEMISTRY MATCH
100%
MECHANICAL MATCH
0%
OVERALL
66.7%
Specifications
Property GB/T 1299 Cr12Mo1V1 GB/T 1299 Cr12MoV
Standard GB/T 1299-2014 GB/T 1299-2014
Category Tool & Die Steels Tool & Die Steels
C (%) 1.45–1.70 1.45–1.70
Si (%) ≤0.40 ≤0.40
Mn (%) ≤0.40 ≤0.40
Cr (%) 11.00–13.00 11.00–13.00
Mo (%) 0.40–0.60 0.40–0.60
V (%) 0.15–0.30 0.15–0.30
S (%) Not specified ≤0.030
P (%) Not specified ≤0.030
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GB/T 1299 Cr12Mo1V1 GB/T 1299 Cr12MoV
Hardness HRC (hardened) 58–62 Not specified
Hardness HB (annealed) ≤255 Not specified
Hardness (annealed) Not specified ≤255 HB
Hardness (hardened) Not specified 57–62 HRC
Compressive Strength Not specified 2400 MPa
Typical Applications
GB/T 1299 Cr12Mo1V1
Precision blanking dies, thread rolling dies, cold forming
GB/T 1299 Cr12MoV
Blanking dies, forming dies, thread rolling dies, punches, shear blades, gauges, broaches, drawing dies
Key Differences
Can GB/T 1299 Cr12Mo1V1 Be Substituted With GB/T 1299 Cr12MoV?
GB/T 1299 Cr12Mo1V1 and GB/T 1299 Cr12MoV share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GB/T 1299 Cr12Mo1V1
Round Bar → (2 listings)
Diameter: 80–80 mm (3.15–3.15 in)
Length: 3100–3200 mm (122.05–125.98 in)
GB/T 1299 Cr12MoV
Round Bar → (2 listings)
Diameter: 80–80 mm (3.15–3.15 in)
Length: 3100–3400 mm (122.05–133.86 in)
On M-EX Right Now
GB/T 1299 Cr12Mo1V1
2 active listings and RFQs →
GB/T 1299 Cr12MoV
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between GB/T 1299 Cr12Mo1V1 and GB/T 1299 Cr12MoV?
GB/T 1299 Cr12MoV specifies S, P which are not specified for GB/T 1299 Cr12Mo1V1.
Can GB/T 1299 Cr12Mo1V1 be substituted with GB/T 1299 Cr12MoV?
GB/T 1299 Cr12Mo1V1 and GB/T 1299 Cr12MoV share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.