Post Stock Login Register

GB/T 1591 Q355D vs AS/NZS 3679.1 300

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

GB/T 1591 Q355D (GB/T 1591:2018) and AS/NZS 3679.1 300 (AS/NZS 3679.1:2016) are both steel grades. Both fall under the Structural Steel category. GB/T 1591 Q355D is typically used for general structure for engineering (plates, strips, bars and sections), while AS/NZS 3679.1 300 is commonly used for hot-rolled structural bars and sections for general structural framing. GB/T 1591 Q355D is defined under Guobiao Standards (GB/T), originating from China, while AS/NZS 3679.1 300 is defined under Australian/New Zealand Standard (AS/NZS), originating from Australia/New Zealand.

As per chemical composition, GB/T 1591 Q355D vs AS/NZS 3679.1 300 is a 79.4% match. As per mechanical properties, the match is 56.1%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With GB/T 1591 Q355D:
GOST 19281 09G2S CSA G40.21 260W CSA G40.21 300W AS/NZS 3679.1 350 CSA G40.21 350W CSA G40.21 400W CSA G40.21 480W ASTM A1008 SS Grade 50 ASTM A1008 SS Grade 80 ASTM A283C ASTM A572 Gr.65
Other Structural Steel Grades to Compare With GB/T 1591 Q355D:
CSA G40.21 400A
Match Breakdown
CHEMISTRY MATCH
79.4%
MECHANICAL MATCH
56.1%
OVERALL
35%
Specifications
Property GB/T 1591 Q355D AS/NZS 3679.1 300
Standard GB/T 1591:2018 AS/NZS 3679.1:2016
Category Structural Steel Structural Steel
C (%) <=0.20 <=0.22
Si (%) <=0.55 <=0.50
Mn (%) <=1.60 <=1.70
P (%) <=0.025 <=0.040
S (%) <=0.025 <=0.040
Cr (%) <=0.30 Not specified
Ni (%) <=0.30 Not specified
Cu (%) <=0.40 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GB/T 1591 Q355D AS/NZS 3679.1 300
Tensile Strength 470-630 MPa 440-600 MPa
Yield Strength >=355 MPa 300 MPa min
Elongation >=22% 22% min
Condition Hot-rolled (as-rolled), nominal thickness or diameter up to 16 mm for yield; tensile strength for up to 100 mm; elongation longitudinal, up to 40 mm Not specified
Typical Applications
GB/T 1591 Q355D
General structure for engineering (plates, strips, bars and sections)
AS/NZS 3679.1 300
Hot-rolled structural bars and sections for general structural framing
Key Differences
Can GB/T 1591 Q355D Be Substituted With AS/NZS 3679.1 300?
GB/T 1591 Q355D and AS/NZS 3679.1 300 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GB/T 1591 Q355D
No active listings currently.
AS/NZS 3679.1 300
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2700–2700 mm (106.3–106.3 in)
On M-EX Right Now
GB/T 1591 Q355D
0 active listings and RFQs →
AS/NZS 3679.1 300
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between GB/T 1591 Q355D and AS/NZS 3679.1 300?
GB/T 1591 Q355D specifies Cr, Ni, Cu which are not specified for AS/NZS 3679.1 300.
Can GB/T 1591 Q355D be substituted with AS/NZS 3679.1 300?
GB/T 1591 Q355D and AS/NZS 3679.1 300 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.