Post Stock Login Register

GB/T 1591 Q500ME vs GB/T 1591 Q550ME

Related Material — 67.4% match based on chemical composition and mechanical property overlap.

GB/T 1591 Q500ME (GB/T 1591:2018) and GB/T 1591 Q550ME (GB/T 1591:2018) are both steel grades. Both fall under the Structural Steel category. GB/T 1591 Q500ME is typically used for general structure for engineering (plates, strips, bars and sections), while GB/T 1591 Q550ME is commonly used for general structure for engineering (plates, strips, bars and sections). GB/T 1591 Q500ME is defined under Guobiao Standards (GB/T), originating from China, while GB/T 1591 Q550ME is defined under Guobiao Standards (GB/T), originating from China.

As per chemical composition, GB/T 1591 Q500ME vs GB/T 1591 Q550ME is a 93.5% match. As per mechanical properties, the match is 15.2%. Combined, this makes them a related material overall at 67.4%.

Frequently Compared With GB/T 1591 Q500ME:
GOST 19281 09G2S CSA G40.21 260W AS/NZS 3679.1 300 CSA G40.21 300W AS/NZS 3679.1 350 CSA G40.21 350W CSA G40.21 480W ASTM A1008 SS Grade 50 ASTM A1008 SS Grade 80
Other Structural Steel Grades to Compare With GB/T 1591 Q500ME:
CSA G40.21 400A CSA G40.21 400W ASTM A283C
Match Breakdown
CHEMISTRY MATCH
93.5%
MECHANICAL MATCH
15.2%
OVERALL
67.4%
Specifications
Property GB/T 1591 Q500ME GB/T 1591 Q550ME
Standard GB/T 1591:2018 GB/T 1591:2018
Category Structural Steel Structural Steel
C (%) <=0.18 <=0.18
Si (%) <=0.60 <=0.60
Mn (%) <=1.80 <=2.00
P (%) <=0.025 <=0.025
S (%) <=0.020 <=0.020
Nb (%) 0.01-0.11 0.01-0.11
V (%) 0.01-0.12 0.01-0.12
Ti (%) 0.006-0.05 0.006-0.05
Cr (%) <=0.60 <=0.80
Ni (%) <=0.80 <=0.80
Cu (%) <=0.55 <=0.80
Mo (%) <=0.20 <=0.30
N (%) <=0.025 <=0.025
B (%) <=0.004 <=0.004
Al (%) >=0.015 >=0.015
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GB/T 1591 Q500ME GB/T 1591 Q550ME
Tensile Strength 610-770 MPa 670-830 MPa
Yield Strength >=500 MPa >=550 MPa
Elongation >=17% >=16%
Condition Thermomechanical processed (TMCP), nominal thickness or diameter up to 16 mm (tensile strength: up to 40 mm) Thermomechanical processed (TMCP), nominal thickness or diameter up to 16 mm (tensile strength: up to 40 mm)
Typical Applications
GB/T 1591 Q500ME
General structure for engineering (plates, strips, bars and sections)
GB/T 1591 Q550ME
General structure for engineering (plates, strips, bars and sections)
Can GB/T 1591 Q500ME Be Substituted With GB/T 1591 Q550ME?
GB/T 1591 Q500ME and GB/T 1591 Q550ME share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
GB/T 1591 Q500ME
0 active listings and RFQs →
GB/T 1591 Q550ME
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GB/T 1591 Q500ME and GB/T 1591 Q550ME?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can GB/T 1591 Q500ME be substituted with GB/T 1591 Q550ME?
GB/T 1591 Q500ME and GB/T 1591 Q550ME share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.