Post Stock Login Register

GB/T 1591 Q620MD vs GB/T 1591 Q550MC

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

GB/T 1591 Q620MD (GB/T 1591:2018) and GB/T 1591 Q550MC (GB/T 1591:2018) are both steel grades. Both fall under the Structural Steel category. GB/T 1591 Q620MD is typically used for general structure for engineering (plates, strips, bars and sections), while GB/T 1591 Q550MC is commonly used for general structure for engineering (plates, strips, bars and sections). GB/T 1591 Q620MD is defined under Guobiao Standards (GB/T), originating from China, while GB/T 1591 Q550MC is defined under Guobiao Standards (GB/T), originating from China.

As per chemical composition, GB/T 1591 Q620MD vs GB/T 1591 Q550MC is a 95.3% match. As per mechanical properties, the match is 19%. Combined, this makes them a related material overall at 69.9%.

Other Structural Steel Grades to Compare With GB/T 1591 Q620MD:
GOST 19281 09G2S CSA G40.21 260W AS/NZS 3679.1 300 CSA G40.21 300W AS/NZS 3679.1 350 CSA G40.21 350W CSA G40.21 400A CSA G40.21 400W CSA G40.21 480W ASTM A1008 SS Grade 50 ASTM A1008 SS Grade 80 ASTM A283C
Match Breakdown
CHEMISTRY MATCH
95.3%
MECHANICAL MATCH
19%
OVERALL
69.9%
Specifications
Property GB/T 1591 Q620MD GB/T 1591 Q550MC
Standard GB/T 1591:2018 GB/T 1591:2018
Category Structural Steel Structural Steel
C (%) <=0.18 <=0.18
Si (%) <=0.60 <=0.60
Mn (%) <=2.60 <=2.00
P (%) <=0.030 <=0.030
S (%) <=0.025 <=0.030
Nb (%) 0.01-0.11 0.01-0.11
V (%) 0.01-0.12 0.01-0.12
Ti (%) 0.006-0.05 0.006-0.05
Cr (%) <=1.00 <=0.80
Ni (%) <=0.80 <=0.80
Cu (%) <=0.80 <=0.80
Mo (%) <=0.30 <=0.30
N (%) <=0.025 <=0.015
B (%) <=0.004 <=0.004
Al (%) >=0.015 >=0.015
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GB/T 1591 Q620MD GB/T 1591 Q550MC
Tensile Strength 710-880 MPa 670-830 MPa
Yield Strength >=620 MPa >=550 MPa
Elongation >=15% >=16%
Condition Thermomechanical processed (TMCP), nominal thickness or diameter up to 16 mm (tensile strength: up to 40 mm) Thermomechanical processed (TMCP), nominal thickness or diameter up to 16 mm (tensile strength: up to 40 mm)
Typical Applications
GB/T 1591 Q620MD
General structure for engineering (plates, strips, bars and sections)
GB/T 1591 Q550MC
General structure for engineering (plates, strips, bars and sections)
Can GB/T 1591 Q620MD Be Substituted With GB/T 1591 Q550MC?
GB/T 1591 Q620MD and GB/T 1591 Q550MC share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
GB/T 1591 Q620MD
0 active listings and RFQs →
GB/T 1591 Q550MC
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GB/T 1591 Q620MD and GB/T 1591 Q550MC?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can GB/T 1591 Q620MD be substituted with GB/T 1591 Q550MC?
GB/T 1591 Q620MD and GB/T 1591 Q550MC share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.