Post Stock Login Register

GB/T 1591 Q620ME vs GB/T 1591 Q690MC

Related Material — 69.4% match based on chemical composition and mechanical property overlap.

GB/T 1591 Q620ME (GB/T 1591:2018) and GB/T 1591 Q690MC (GB/T 1591:2018) are both steel grades. Both fall under the Structural Steel category. GB/T 1591 Q620ME is typically used for general structure for engineering (plates, strips, bars and sections), while GB/T 1591 Q690MC is commonly used for general structure for engineering (plates, strips, bars and sections). GB/T 1591 Q620ME is defined under Guobiao Standards (GB/T), originating from China, while GB/T 1591 Q690MC is defined under Guobiao Standards (GB/T), originating from China.

As per chemical composition, GB/T 1591 Q620ME vs GB/T 1591 Q690MC is a 96.1% match. As per mechanical properties, the match is 15.9%. Combined, this makes them a related material overall at 69.4%.

Other Structural Steel Grades to Compare With GB/T 1591 Q620ME:
GOST 19281 09G2S CSA G40.21 260W AS/NZS 3679.1 300 CSA G40.21 300W AS/NZS 3679.1 350 CSA G40.21 350W CSA G40.21 400A CSA G40.21 400W CSA G40.21 480W ASTM A1008 SS Grade 50 ASTM A1008 SS Grade 80 ASTM A283C
Match Breakdown
CHEMISTRY MATCH
96.1%
MECHANICAL MATCH
15.9%
OVERALL
69.4%
Specifications
Property GB/T 1591 Q620ME GB/T 1591 Q690MC
Standard GB/T 1591:2018 GB/T 1591:2018
Category Structural Steel Structural Steel
C (%) <=0.18 <=0.18
Si (%) <=0.60 <=0.60
Mn (%) <=2.60 <=2.00
P (%) <=0.025 <=0.030
S (%) <=0.020 <=0.030
Nb (%) 0.01-0.11 0.01-0.11
V (%) 0.01-0.12 0.01-0.12
Ti (%) 0.006-0.05 0.006-0.05
Cr (%) <=1.00 <=1.00
Ni (%) <=0.80 <=0.80
Cu (%) <=0.80 <=0.80
Mo (%) <=0.30 <=0.30
N (%) <=0.025 <=0.015
B (%) <=0.004 <=0.004
Al (%) >=0.015 >=0.015
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GB/T 1591 Q620ME GB/T 1591 Q690MC
Tensile Strength 710-880 MPa 770-940 MPa
Yield Strength >=620 MPa >=690 MPa
Elongation >=15% >=14%
Condition Thermomechanical processed (TMCP), nominal thickness or diameter up to 16 mm (tensile strength: up to 40 mm) Thermomechanical processed (TMCP), nominal thickness or diameter up to 16 mm (tensile strength: up to 40 mm)
Typical Applications
GB/T 1591 Q620ME
General structure for engineering (plates, strips, bars and sections)
GB/T 1591 Q690MC
General structure for engineering (plates, strips, bars and sections)
Can GB/T 1591 Q620ME Be Substituted With GB/T 1591 Q690MC?
GB/T 1591 Q620ME and GB/T 1591 Q690MC share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
GB/T 1591 Q620ME
0 active listings and RFQs →
GB/T 1591 Q690MC
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GB/T 1591 Q620ME and GB/T 1591 Q690MC?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can GB/T 1591 Q620ME be substituted with GB/T 1591 Q690MC?
GB/T 1591 Q620ME and GB/T 1591 Q690MC share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.