Post Stock Login Register

GB/T 3077 15CrMo vs IS 1570 (Part 4) 07Cr4Mo6

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

GB/T 3077 15CrMo (GB/T 3077:2015) and IS 1570 (Part 4) 07Cr4Mo6 (IS 1570 (Part 4):1988) are both steel grades. Both fall under the Alloy Steel category. GB/T 3077 15CrMo is defined under Guobiao Standards (GB/T), originating from China, while IS 1570 (Part 4) 07Cr4Mo6 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, GB/T 3077 15CrMo vs IS 1570 (Part 4) 07Cr4Mo6 is a 69.2% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With GB/T 3077 15CrMo:
NF A35-565 100C6 IS 1570 (Part 7) 12Cr4Mo5H IS 4367 07Cr4Mo6 UNI 11234 100Cr6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 7) 10Cr36Mo10H IS 11169 (Part 1) 12Cr4Mo2 GOST 4543 12HN3A IS 1570 (Part 4) 10Cr20Mo6 IS 4367 10Cr9Mo10
Match Breakdown
CHEMISTRY MATCH
69.2%
MECHANICAL MATCH
No shared data
OVERALL
35%
Specifications
Property GB/T 3077 15CrMo IS 1570 (Part 4) 07Cr4Mo6
Standard GB/T 3077:2015 IS 1570 (Part 4):1988
Category Alloy Steel Alloy Steel
C (%) 0.12-0.18 <=0.12
Si (%) 0.17-0.37 0.15-0.60
Mn (%) 0.40-0.70 0.40-0.70
Cr (%) 0.80-1.10 0.70-1.10
Mo (%) 0.40-0.55 0.45-0.65
P (%) <=0.030 Not specified
S (%) <=0.030 Not specified
Cu (%) <=0.30 Not specified
Ni (%) Not specified <=0.30
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GB/T 3077 15CrMo IS 1570 (Part 4) 07Cr4Mo6
Tensile Strength >=440 MPa Not specified
Yield Strength >=295 MPa Not specified
Elongation >=22% Not specified
Hardness <=179 HB Not specified
Condition Quenched and tempered, test sample 30 mm; hardness is for bars delivered annealed or high temperature tempered Not specified
Typical Applications
GB/T 3077 15CrMo
Used for boiler tubes, pressure vessels, steam pipes, petrochemical equipment, flanges, and high-temperature fasteners.
IS 1570 (Part 4) 07Cr4Mo6
Not documented
Key Differences
Can GB/T 3077 15CrMo Be Substituted With IS 1570 (Part 4) 07Cr4Mo6?
GB/T 3077 15CrMo and IS 1570 (Part 4) 07Cr4Mo6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GB/T 3077 15CrMo
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 5700–5700 mm (224.41–224.41 in)
IS 1570 (Part 4) 07Cr4Mo6
No active listings currently.
On M-EX Right Now
GB/T 3077 15CrMo
2 active listings and RFQs →
IS 1570 (Part 4) 07Cr4Mo6
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GB/T 3077 15CrMo and IS 1570 (Part 4) 07Cr4Mo6?
GB/T 3077 15CrMo specifies P, S, Cu which are not specified for IS 1570 (Part 4) 07Cr4Mo6. IS 1570 (Part 4) 07Cr4Mo6 specifies Ni which is not specified for GB/T 3077 15CrMo.
Can GB/T 3077 15CrMo be substituted with IS 1570 (Part 4) 07Cr4Mo6?
GB/T 3077 15CrMo and IS 1570 (Part 4) 07Cr4Mo6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.