Post Stock Login Register

GB/T 3077 20Cr vs BS 970 EN207

Close Alternative — 79.7% match based on chemical composition and mechanical property overlap.

GB/T 3077 20Cr (GB/T 3077:2015) and BS 970 EN207 (BS 970:1955) are both steel grades. Both fall under the Alloy Steel category. GB/T 3077 20Cr is defined under Guobiao Standards (GB/T), originating from China, while BS 970 EN207 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, GB/T 3077 20Cr vs BS 970 EN207 is a 79.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 79.7%.

Frequently Compared With GB/T 3077 20Cr:
IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Cr20Mo6 IS 4367 10Cr9Mo10 IS 1570 (Part 4) 10Mo6 NF A35-565 100C6 IS 1570 (Part 7) 10Cr36Mo10H IS 1570 (Part 7) 10Mo6H IS 4367 07Cr4Mo6 UNI 11234 100Cr6 IS 1570 (Part 4) 103Cr6
Match Breakdown
CHEMISTRY MATCH
79.7%
MECHANICAL MATCH
No shared data
OVERALL
79.7%
Specifications
Property GB/T 3077 20Cr BS 970 EN207
Standard GB/T 3077:2015 BS 970:1955
Category Alloy Steel Alloy Steel
C (%) 0.18-0.24 0.16-0.21
Si (%) 0.17-0.37 0.10-0.35
Mn (%) 0.50-0.80 0.60-0.80
Cr (%) 0.70-1.00 0.60-0.80
P (%) <=0.030 <=0.050
S (%) <=0.030 <=0.050
Cu (%) <=0.30 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GB/T 3077 20Cr BS 970 EN207
Tensile Strength >=835 MPa Not specified
Yield Strength >=540 MPa Not specified
Elongation >=10% Not specified
Hardness <=179 HB Not specified
Condition Quenched and tempered, test sample 15 mm; hardness is for bars delivered annealed or high temperature tempered Not specified
Typical Applications
GB/T 3077 20Cr
Hot-rolled or forged structural alloy steel bars
BS 970 EN207
Not documented
Key Differences
Can GB/T 3077 20Cr Be Substituted With BS 970 EN207?
GB/T 3077 20Cr and BS 970 EN207 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
GB/T 3077 20Cr
0 active listings and RFQs →
BS 970 EN207
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GB/T 3077 20Cr and BS 970 EN207?
GB/T 3077 20Cr specifies Cu which is not specified for BS 970 EN207.
Can GB/T 3077 20Cr be substituted with BS 970 EN207?
GB/T 3077 20Cr and BS 970 EN207 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.