Post Stock Login Register

GB/T 3077 20MnTiB vs GB/T 3077 20Mn2

Close Alternative — 74% match based on chemical composition and mechanical property overlap.

GB/T 3077 20MnTiB (GB/T 3077:2015) and GB/T 3077 20Mn2 (GB/T 3077:2015) are both steel grades. Both fall under the Alloy Steel category. GB/T 3077 20MnTiB is typically used for hot-rolled or forged structural alloy steel bars, while GB/T 3077 20Mn2 is commonly used for hot-rolled or forged structural alloy steel bars. GB/T 3077 20MnTiB is defined under Guobiao Standards (GB/T), originating from China, while GB/T 3077 20Mn2 is defined under Guobiao Standards (GB/T), originating from China.

As per chemical composition, GB/T 3077 20MnTiB vs GB/T 3077 20Mn2 is a 86% match. As per mechanical properties, the match is 50%. Combined, this makes them a close alternative overall at 74%.

Frequently Compared With GB/T 3077 20MnTiB:
IS 1570 (Part 7) 10Mo6H IS 4367 07Cr4Mo6 IS 1570 (Part 4) 07Cr4Mo6 NF A35-565 100C6 UNI 11234 100Cr6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 7) 10Cr36Mo10H IS 4367 10Cr9Mo10 EN 10028-2 10CrMo9-10
Match Breakdown
CHEMISTRY MATCH
86%
MECHANICAL MATCH
50%
OVERALL
74%
Specifications
Property GB/T 3077 20MnTiB GB/T 3077 20Mn2
Standard GB/T 3077:2015 GB/T 3077:2015
Category Alloy Steel Alloy Steel
C (%) 0.17-0.24 0.17-0.24
Si (%) 0.17-0.37 0.17-0.37
Mn (%) 1.30-1.60 1.40-1.80
B (%) 0.0008-0.0035 Not specified
Ti (%) 0.04-0.10 Not specified
P (%) <=0.030 <=0.030
S (%) <=0.030 <=0.030
Cu (%) <=0.30 <=0.30
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GB/T 3077 20MnTiB GB/T 3077 20Mn2
Tensile Strength >=1130 MPa >=785 MPa
Yield Strength >=930 MPa >=590 MPa
Elongation >=10% >=10%
Hardness <=187 HB <=187 HB
Condition Quenched and tempered, test sample 15 mm; hardness is for bars delivered annealed or high temperature tempered Quenched and tempered, test sample 15 mm; hardness is for bars delivered annealed or high temperature tempered
Typical Applications
GB/T 3077 20MnTiB
Hot-rolled or forged structural alloy steel bars
GB/T 3077 20Mn2
Hot-rolled or forged structural alloy steel bars
Key Differences
Can GB/T 3077 20MnTiB Be Substituted With GB/T 3077 20Mn2?
GB/T 3077 20MnTiB and GB/T 3077 20Mn2 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
GB/T 3077 20MnTiB
0 active listings and RFQs →
GB/T 3077 20Mn2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GB/T 3077 20MnTiB and GB/T 3077 20Mn2?
GB/T 3077 20MnTiB specifies B, Ti which are not specified for GB/T 3077 20Mn2.
Can GB/T 3077 20MnTiB be substituted with GB/T 3077 20Mn2?
GB/T 3077 20MnTiB and GB/T 3077 20Mn2 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.