Post Stock Login Register

GB/T 3077 30CrNiMo vs SAE J404 E4340

Related Material — 66.5% match based on chemical composition and mechanical property overlap.

GB/T 3077 30CrNiMo (GB/T 3077:2015) and SAE J404 E4340 (SAE J404:2000) are both steel grades. Both fall under the Alloy Steel category. GB/T 3077 30CrNiMo is typically used for hot-rolled or forged structural alloy steel bars, while SAE J404 E4340 is commonly used for chemistry-only alloy steel grade; see the composition notes for product scope. GB/T 3077 30CrNiMo is defined under Guobiao Standards (GB/T), originating from China, while SAE J404 E4340 is defined under SAE International, originating from United States.

As per chemical composition, GB/T 3077 30CrNiMo vs SAE J404 E4340 is a 66.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 66.5%.

Frequently Compared With GB/T 3077 30CrNiMo:
EN 10028-2 10CrMo9-10 IS 1570 (Part 7) 10Mo6H IS 4367 07Cr4Mo6 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 10Mo6 IS 1570 (Part 4) 07Cr4Mo6 NF A35-565 100C6 UNI 11234 100Cr6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 7) 10Cr36Mo10H
Match Breakdown
CHEMISTRY MATCH
66.5%
MECHANICAL MATCH
No shared data
OVERALL
66.5%
Specifications
Property GB/T 3077 30CrNiMo SAE J404 E4340
Standard GB/T 3077:2015 SAE J404:2000
Category Alloy Steel Alloy Steel
C (%) 0.28-0.33 0.38-0.43
Si (%) 0.17-0.37 0.15-0.35
Mn (%) 0.70-0.90 0.65-0.85
Cr (%) 0.70-1.00 0.70-0.90
Mo (%) 0.25-0.45 0.20-0.30
Ni (%) 0.60-0.80 1.65-2.00
P (%) <=0.030 <=0.025
S (%) <=0.030 <=0.025
Cu (%) <=0.30 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GB/T 3077 30CrNiMo SAE J404 E4340
Tensile Strength >=980 MPa Not specified
Yield Strength >=785 MPa Not specified
Elongation >=10% Not specified
Hardness <=269 HB Not specified
Condition Quenched and tempered, test sample 25 mm; hardness is for bars delivered annealed or high temperature tempered Not specified
Typical Applications
GB/T 3077 30CrNiMo
Hot-rolled or forged structural alloy steel bars
SAE J404 E4340
Chemistry-only alloy steel grade; see the composition notes for product scope
Key Differences
Can GB/T 3077 30CrNiMo Be Substituted With SAE J404 E4340?
GB/T 3077 30CrNiMo and SAE J404 E4340 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
GB/T 3077 30CrNiMo
0 active listings and RFQs →
SAE J404 E4340
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GB/T 3077 30CrNiMo and SAE J404 E4340?
GB/T 3077 30CrNiMo specifies Cu which is not specified for SAE J404 E4340.
Can GB/T 3077 30CrNiMo be substituted with SAE J404 E4340?
GB/T 3077 30CrNiMo and SAE J404 E4340 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.