Post Stock Login Register

GB/T 3077 35Cr2Ni4Mo vs IS 4367 10Cr9Mo10

Minimal Match — 37.5% match based on chemical composition and mechanical property overlap.

GB/T 3077 35Cr2Ni4Mo (GB/T 3077:2015) and IS 4367 10Cr9Mo10 (IS 4367:1991) are both steel grades. Both fall under the Alloy Steel category. GB/T 3077 35Cr2Ni4Mo is defined under Guobiao Standards (GB/T), originating from China, while IS 4367 10Cr9Mo10 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, GB/T 3077 35Cr2Ni4Mo vs IS 4367 10Cr9Mo10 is a 56.2% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 37.5%.

Frequently Compared With GB/T 3077 35Cr2Ni4Mo:
IS 4367 07Cr4Mo6 IS 1570 (Part 7) 10Mo6H IS 1570 (Part 4) 07Cr4Mo6 NF A35-565 100C6 UNI 11234 100Cr6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 4) 10Mo6 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 7) 10Cr36Mo10H EN 10028-2 10CrMo9-10
Match Breakdown
CHEMISTRY MATCH
56.2%
MECHANICAL MATCH
0%
OVERALL
37.5%
Specifications
Property GB/T 3077 35Cr2Ni4Mo IS 4367 10Cr9Mo10
Standard GB/T 3077:2015 IS 4367:1991
Category Alloy Steel Alloy Steel
C (%) 0.32-0.39 <=0.15
Si (%) 0.17-0.37 <=0.50
Mn (%) 0.50-0.80 0.40-0.70
Cr (%) 1.60-2.00 2.00-2.50
Mo (%) 0.25-0.45 0.90-1.10
Ni (%) 3.60-4.10 <=0.30
P (%) <=0.030 <=0.035
S (%) <=0.030 <=0.035
Cu (%) <=0.30 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GB/T 3077 35Cr2Ni4Mo IS 4367 10Cr9Mo10
Tensile Strength >=1130 MPa 410-590 MPa
Yield Strength >=980 MPa 245 MPa min
Elongation >=10% >=18%
Hardness <=269 HB Not specified
Condition Quenched and tempered, test sample 25 mm; hardness is for bars delivered annealed or high temperature tempered Normalised and tempered, ruling section up to 50 mm
Izod Impact Not specified 55 J min
Hardness (soft annealed) Not specified <=187 HB
Typical Applications
GB/T 3077 35Cr2Ni4Mo
Hot-rolled or forged structural alloy steel bars
IS 4367 10Cr9Mo10
Not documented
Key Differences
Can GB/T 3077 35Cr2Ni4Mo Be Substituted With IS 4367 10Cr9Mo10?
GB/T 3077 35Cr2Ni4Mo and IS 4367 10Cr9Mo10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
GB/T 3077 35Cr2Ni4Mo
0 active listings and RFQs →
IS 4367 10Cr9Mo10
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GB/T 3077 35Cr2Ni4Mo and IS 4367 10Cr9Mo10?
GB/T 3077 35Cr2Ni4Mo specifies Cu which is not specified for IS 4367 10Cr9Mo10.
Can GB/T 3077 35Cr2Ni4Mo be substituted with IS 4367 10Cr9Mo10?
GB/T 3077 35Cr2Ni4Mo and IS 4367 10Cr9Mo10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.