Post Stock Login Register

GB/T 3077 35CrMnSi vs IS 4367 10Cr9Mo10

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

GB/T 3077 35CrMnSi (GB/T 3077:2015) and IS 4367 10Cr9Mo10 (IS 4367:1991) are both steel grades. Both fall under the Alloy Steel category. GB/T 3077 35CrMnSi is defined under Guobiao Standards (GB/T), originating from China, while IS 4367 10Cr9Mo10 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, GB/T 3077 35CrMnSi vs IS 4367 10Cr9Mo10 is a 52.5% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With GB/T 3077 35CrMnSi:
IS 1570 (Part 4) 07Cr4Mo6 UNI 11234 100Cr6 IS 1570 (Part 4) 105Cr5 IS 4367 07Cr4Mo6 NF A35-565 100C6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 7) 10Cr36Mo10H EN 10028-2 10CrMo9-10 IS 1570 (Part 4) 10Mo6 IS 1570 (Part 7) 10Mo6H
Match Breakdown
CHEMISTRY MATCH
52.5%
MECHANICAL MATCH
0%
OVERALL
35%
Specifications
Property GB/T 3077 35CrMnSi IS 4367 10Cr9Mo10
Standard GB/T 3077:2015 IS 4367:1991
Category Alloy Steel Alloy Steel
C (%) 0.32-0.39 <=0.15
Si (%) 1.10-1.40 <=0.50
Mn (%) 0.80-1.10 0.40-0.70
Cr (%) 1.10-1.40 2.00-2.50
P (%) <=0.030 <=0.035
S (%) <=0.030 <=0.035
Cu (%) <=0.30 Not specified
Ni (%) Not specified <=0.30
Mo (%) Not specified 0.90-1.10
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GB/T 3077 35CrMnSi IS 4367 10Cr9Mo10
Tensile Strength >=1620 MPa 410-590 MPa
Yield Strength >=1280 MPa 245 MPa min
Elongation >=9% >=18%
Hardness <=241 HB Not specified
Condition Quenched and tempered, test sample Specimen (size not stated); hardness is for bars delivered annealed or high temperature tempered Normalised and tempered, ruling section up to 50 mm
Izod Impact Not specified 55 J min
Hardness (soft annealed) Not specified <=187 HB
Typical Applications
GB/T 3077 35CrMnSi
Hot-rolled or forged structural alloy steel bars
IS 4367 10Cr9Mo10
Not documented
Key Differences
Can GB/T 3077 35CrMnSi Be Substituted With IS 4367 10Cr9Mo10?
GB/T 3077 35CrMnSi and IS 4367 10Cr9Mo10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
GB/T 3077 35CrMnSi
0 active listings and RFQs →
IS 4367 10Cr9Mo10
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GB/T 3077 35CrMnSi and IS 4367 10Cr9Mo10?
GB/T 3077 35CrMnSi specifies Cu which is not specified for IS 4367 10Cr9Mo10. IS 4367 10Cr9Mo10 specifies Ni, Mo which are not specified for GB/T 3077 35CrMnSi.
Can GB/T 3077 35CrMnSi be substituted with IS 4367 10Cr9Mo10?
GB/T 3077 35CrMnSi and IS 4367 10Cr9Mo10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.