Post Stock Login Register

GB/T 3077 40CrNi2Mo vs SAE J404 4320

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

GB/T 3077 40CrNi2Mo (GB/T 3077:2015) and SAE J404 4320 (SAE J404:2009) are both steel grades. Both fall under the Alloy Steel category. GB/T 3077 40CrNi2Mo is typically used for hot-rolled or forged structural alloy steel bars, while SAE J404 4320 is commonly used for used for gears, shafts, aircraft components, pinions, axles, and transmission parts.. GB/T 3077 40CrNi2Mo is defined under Guobiao Standards (GB/T), originating from China, while SAE J404 4320 is defined under SAE International, originating from United States.

As per chemical composition, GB/T 3077 40CrNi2Mo vs SAE J404 4320 is a 73.8% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With GB/T 3077 40CrNi2Mo:
IS 1570 (Part 7) 10Mo6H UNI 11234 100Cr6 IS 4367 10Cr9Mo10 IS 4367 07Cr4Mo6 IS 1570 (Part 4) 07Cr4Mo6 NF A35-565 100C6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 7) 10Cr36Mo10H EN 10028-2 10CrMo9-10
Match Breakdown
CHEMISTRY MATCH
73.8%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property GB/T 3077 40CrNi2Mo SAE J404 4320
Standard GB/T 3077:2015 SAE J404:2009
Category Alloy Steel Alloy Steel
C (%) 0.38-0.43 0.17-0.22
Si (%) 0.17-0.37 0.15-0.35
Mn (%) 0.60-0.80 0.45-0.65
Cr (%) 0.70-0.90 0.40-0.60
Mo (%) 0.20-0.30 0.20-0.30
Ni (%) 1.65-2.00 1.65-2.00
P (%) <=0.030 <=0.030
S (%) <=0.030 <=0.040
Cu (%) <=0.30 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GB/T 3077 40CrNi2Mo SAE J404 4320
Tensile Strength >=1050 MPa Not specified
Yield Strength >=980 MPa Not specified
Elongation >=12% Not specified
Hardness <=269 HB Not specified
Condition Quenched and tempered, test sample 25 mm; hardness is for bars delivered annealed or high temperature tempered Not specified
Typical Applications
GB/T 3077 40CrNi2Mo
Hot-rolled or forged structural alloy steel bars
SAE J404 4320
Used for gears, shafts, aircraft components, pinions, axles, and transmission parts.
Key Differences
Can GB/T 3077 40CrNi2Mo Be Substituted With SAE J404 4320?
GB/T 3077 40CrNi2Mo and SAE J404 4320 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GB/T 3077 40CrNi2Mo
No active listings currently.
SAE J404 4320
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 4600–4600 mm (181.1–181.1 in)
On M-EX Right Now
GB/T 3077 40CrNi2Mo
0 active listings and RFQs →
SAE J404 4320
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between GB/T 3077 40CrNi2Mo and SAE J404 4320?
GB/T 3077 40CrNi2Mo specifies Cu which is not specified for SAE J404 4320.
Can GB/T 3077 40CrNi2Mo be substituted with SAE J404 4320?
GB/T 3077 40CrNi2Mo and SAE J404 4320 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.