Post Stock Login Register

GB/T 3077 42CrMo vs IS 1570 (Part 4) 105Cr5

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

GB/T 3077 42CrMo (GB/T 3077:2015) and IS 1570 (Part 4) 105Cr5 (IS 1570 (Part 4):1988) are both steel grades. Both fall under the Alloy Steel category. GB/T 3077 42CrMo is defined under Guobiao Standards (GB/T), originating from China, while IS 1570 (Part 4) 105Cr5 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, GB/T 3077 42CrMo vs IS 1570 (Part 4) 105Cr5 is a 68.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With GB/T 3077 42CrMo:
NF A35-565 100C6 GOST 4543 12HN3A UNI 11234 100Cr6 GB/T 3077 12Cr2Ni4A IS 1570 (Part 4) 103Cr6 IS 4367 07Cr4Mo6 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 103Cr4 IS 4367 10Cr9Mo10 IS 1570 (Part 7) 10Cr36Mo10H IS 1570 (Part 4) 10Cr20Mo6 EN 10028-2 10CrMo9-10
Match Breakdown
CHEMISTRY MATCH
68.7%
MECHANICAL MATCH
No shared data
OVERALL
35%
Specifications
Property GB/T 3077 42CrMo IS 1570 (Part 4) 105Cr5
Standard GB/T 3077:2015 IS 1570 (Part 4):1988
Category Alloy Steel Alloy Steel
C (%) 0.38-0.45 0.90-1.20
Si (%) 0.17-0.37 0.10-0.35
Mn (%) 0.50-0.80 0.40-0.80
Cr (%) 0.90-1.20 1.00-1.60
Mo (%) 0.15-0.25 Not specified
P (%) <=0.030 Not specified
S (%) <=0.030 Not specified
Cu (%) <=0.30 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GB/T 3077 42CrMo IS 1570 (Part 4) 105Cr5
Tensile Strength >=1080 MPa Not specified
Yield Strength >=930 MPa Not specified
Elongation >=12% Not specified
Hardness <=229 HB Not specified
Condition Quenched and tempered, test sample 25 mm; hardness is for bars delivered annealed or high temperature tempered Not specified
Typical Applications
GB/T 3077 42CrMo
gears, heavy shafts, axles, bolts, pressure vessels, forgings
IS 1570 (Part 4) 105Cr5
Not documented
Key Differences
Can GB/T 3077 42CrMo Be Substituted With IS 1570 (Part 4) 105Cr5?
GB/T 3077 42CrMo and IS 1570 (Part 4) 105Cr5 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GB/T 3077 42CrMo
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 4900–7000 mm (192.91–275.59 in)
IS 1570 (Part 4) 105Cr5
No active listings currently.
On M-EX Right Now
GB/T 3077 42CrMo
2 active listings and RFQs →
IS 1570 (Part 4) 105Cr5
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GB/T 3077 42CrMo and IS 1570 (Part 4) 105Cr5?
GB/T 3077 42CrMo specifies Mo, P, S, Cu which are not specified for IS 1570 (Part 4) 105Cr5.
Can GB/T 3077 42CrMo be substituted with IS 1570 (Part 4) 105Cr5?
GB/T 3077 42CrMo and IS 1570 (Part 4) 105Cr5 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.