Post Stock Login Register

GB/T 699 10 vs BS 970 (Part 1) 655H13

Related Material — 65% match based on chemical composition and mechanical property overlap.

GB/T 699 10 (GB/T 699:2015) and BS 970 (Part 1) 655H13 (BS 970 (Part 1):1991) are both steel grades. GB/T 699 10 is classified under Carbon Steel, while BS 970 (Part 1) 655H13 is classified under Alloy Steel — a different category, which is worth noting alongside the chemistry match below. GB/T 699 10 is typically used for hot-rolled or forged quality carbon structural steel bars up to 250 mm, while BS 970 (Part 1) 655H13 is commonly used for case hardening steel (section four). GB/T 699 10 is defined under Guobiao Standards (GB/T), originating from China, while BS 970 (Part 1) 655H13 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, GB/T 699 10 vs BS 970 (Part 1) 655H13 is a 66.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 65%.

Frequently Compared With GB/T 699 10:
BS 970 (Part 1) 040A04 BS 970 (Part 1) 040A10 BS 970 (Part 1) 040A12 BS 970 (Part 1) 045A10 BS 970 (Part 3) 045A10 BS 970 (Part 1) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 1) 045M10 BS 970 (Part 3) 045M10 BS 970 (Part 1) 055M15 BS 970 (Part 1) 060A32 BS 970 (Part 1) 060A40
Match Breakdown
CHEMISTRY MATCH
66.5%
MECHANICAL MATCH
No shared data
OVERALL
65%
Specifications
Property GB/T 699 10 BS 970 (Part 1) 655H13
Standard GB/T 699:2015 BS 970 (Part 1):1991
Category Carbon Steel Alloy Steel
C (%) 0.07-0.13 0.10-0.16
Si (%) 0.17-0.37 Not specified
Mn (%) 0.35-0.65 0.35-0.60
P (%) <=0.035 Not specified
S (%) <=0.035 Not specified
Cr (%) <=0.15 0.70-1.00
Ni (%) <=0.30 3.00-3.75
Cu (%) <=0.25 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GB/T 699 10 BS 970 (Part 1) 655H13
Tensile Strength >=335 MPa Not specified
Yield Strength >=205 MPa Not specified
Elongation >=31% Not specified
Hardness <=137 HB (as delivered, not heat treated) Not specified
Condition Normalized 25 mm sample blank, bars up to 80 mm; hardness for delivery state Not specified
Typical Applications
GB/T 699 10
Hot-rolled or forged quality carbon structural steel bars up to 250 mm
BS 970 (Part 1) 655H13
Case hardening steel (section four)
Key Differences
Can GB/T 699 10 Be Substituted With BS 970 (Part 1) 655H13?
GB/T 699 10 and BS 970 (Part 1) 655H13 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
GB/T 699 10
0 active listings and RFQs →
BS 970 (Part 1) 655H13
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GB/T 699 10 and BS 970 (Part 1) 655H13?
Different category: GB/T 699 10 is Carbon Steel, BS 970 (Part 1) 655H13 is Alloy Steel. GB/T 699 10 specifies Si, P, S, Cu which are not specified for BS 970 (Part 1) 655H13.
Can GB/T 699 10 be substituted with BS 970 (Part 1) 655H13?
GB/T 699 10 and BS 970 (Part 1) 655H13 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.