Post Stock Login Register

GB/T 699 35Mn vs EN 10084 15NiCr13

Related Material — 65% match based on chemical composition and mechanical property overlap.

GB/T 699 35Mn (GB/T 699:2015) and EN 10084 15NiCr13 (EN 10084:2008) are both steel grades. GB/T 699 35Mn is classified under Carbon Steel, while EN 10084 15NiCr13 is classified under Alloy Steel — a different category, which is worth noting alongside the chemistry match below. GB/T 699 35Mn is typically used for hot-rolled or forged quality carbon structural steel bars up to 250 mm, while EN 10084 15NiCr13 is commonly used for heavily loaded gears, cams, camshafts. GB/T 699 35Mn is defined under Guobiao Standards (GB/T), originating from China, while EN 10084 15NiCr13 is defined under European Standard (EN), originating from Europe.

As per chemical composition, GB/T 699 35Mn vs EN 10084 15NiCr13 is a 62.6% match. As per mechanical properties, the match is 100%. Combined, this makes them a related material overall at 65%.

Frequently Compared With GB/T 699 35Mn:
BS 970 (Part 1) 060A45 BS 970 (Part 1) 045M10 BS 970 (Part 3) 045M10 BS 970 (Part 1) 055M15 BS 970 (Part 1) 060A32 BS 970 (Part 1) 060A40 BS 970 (Part 1) 040A04 BS 970 (Part 1) 040A12 BS 970 (Part 1) 045A10 BS 970 (Part 1) 045A10 BS 970 (Part 3) 045A10 BS 970 (Part 1) 040A10
Match Breakdown
CHEMISTRY MATCH
62.6%
MECHANICAL MATCH
100%
OVERALL
65%
Specifications
Property GB/T 699 35Mn EN 10084 15NiCr13
Standard GB/T 699:2015 EN 10084:2008
Category Carbon Steel Alloy Steel
C (%) 0.32-0.39 0.14-0.20
Si (%) 0.17-0.37 <=0.40
Mn (%) 0.70-1.00 0.40-0.70
P (%) <=0.035 <=0.025
S (%) <=0.035 <=0.035
Cr (%) <=0.25 0.60-0.90
Ni (%) <=0.30 3.00-3.50
Cu (%) <=0.25 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GB/T 699 35Mn EN 10084 15NiCr13
Tensile Strength >=560 MPa Not specified
Yield Strength >=335 MPa Not specified
Elongation >=18% Not specified
Hardness <=229 HB (as delivered, not heat treated) Soft annealed: 229 HB max
Condition Normalized 25 mm sample blank, bars up to 80 mm; hardness for delivery state Soft annealed
Hardenability Not specified +H band at 1.5 mm from the quenched end: 41 to 48 HRC
Typical Applications
GB/T 699 35Mn
Hot-rolled or forged quality carbon structural steel bars up to 250 mm
EN 10084 15NiCr13
Heavily loaded gears, cams, camshafts
Key Differences
Can GB/T 699 35Mn Be Substituted With EN 10084 15NiCr13?
GB/T 699 35Mn and EN 10084 15NiCr13 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GB/T 699 35Mn
No active listings currently.
EN 10084 15NiCr13
Round Bar → (6 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 5200–7000 mm (204.72–275.59 in)
On M-EX Right Now
GB/T 699 35Mn
0 active listings and RFQs →
EN 10084 15NiCr13
6 active listings and RFQs →
Frequently Asked Questions
What is the difference between GB/T 699 35Mn and EN 10084 15NiCr13?
Different category: GB/T 699 35Mn is Carbon Steel, EN 10084 15NiCr13 is Alloy Steel. GB/T 699 35Mn specifies Cu which is not specified for EN 10084 15NiCr13.
Can GB/T 699 35Mn be substituted with EN 10084 15NiCr13?
GB/T 699 35Mn and EN 10084 15NiCr13 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.