Post Stock Login Register

GB/T 699 45 vs IS 1570 (Part 4) 15Cr6Ni6

Related Material — 65% match based on chemical composition and mechanical property overlap.

GB/T 699 45 (GB/T 699:2015) and IS 1570 (Part 4) 15Cr6Ni6 (IS 1570 (Part 4):1988) are both steel grades. GB/T 699 45 is classified under Carbon Steel, while IS 1570 (Part 4) 15Cr6Ni6 is classified under Alloy Steel — a different category, which is worth noting alongside the chemistry match below. GB/T 699 45 is defined under Guobiao Standards (GB/T), originating from China, while IS 1570 (Part 4) 15Cr6Ni6 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, GB/T 699 45 vs IS 1570 (Part 4) 15Cr6Ni6 is a 65% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 65%.

Frequently Compared With GB/T 699 45:
BS 970 (Part 3) 070M55 BS 970 (Part 1) 040A10 BS 970 (Part 1) 045A10 BS 970 (Part 1) 040A04 BS 970 (Part 1) 040A12 BS 970 (Part 1) 045M10 BS 970 (Part 1) 055M15 BS 970 (Part 1) 060A32 BS 970 (Part 3) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 3) 045M10 BS 970 (Part 1) 045A10
Match Breakdown
CHEMISTRY MATCH
65%
MECHANICAL MATCH
No shared data
OVERALL
65%
Specifications
Property GB/T 699 45 IS 1570 (Part 4) 15Cr6Ni6
Standard GB/T 699:2015 IS 1570 (Part 4):1988
Category Carbon Steel Alloy Steel
C (%) 0.42-0.50 0.12-0.18
Si (%) 0.17-0.37 0.15-0.35
Mn (%) 0.50-0.80 0.40-0.60
P (%) <=0.035 Not specified
S (%) <=0.035 Not specified
Cr (%) <=0.25 1.40-1.70
Ni (%) <=0.30 1.40-1.70
Cu (%) <=0.25 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GB/T 699 45 IS 1570 (Part 4) 15Cr6Ni6
Tensile Strength >=600 MPa Not specified
Yield Strength >=355 MPa Not specified
Elongation >=16% Not specified
Hardness <=229 HB (as delivered, not heat treated) Not specified
Condition Normalized 25 mm sample blank, bars up to 80 mm; hardness for delivery state Not specified
Typical Applications
GB/T 699 45
Used for shafts, gears, bolts, connecting rods, axles, and hydraulic components.
IS 1570 (Part 4) 15Cr6Ni6
Not documented
Key Differences
Can GB/T 699 45 Be Substituted With IS 1570 (Part 4) 15Cr6Ni6?
GB/T 699 45 and IS 1570 (Part 4) 15Cr6Ni6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GB/T 699 45
Round Bar → (2 listings)
Diameter: 40–40 mm (1.57–1.57 in)
Length: 5600–6600 mm (220.47–259.84 in)
IS 1570 (Part 4) 15Cr6Ni6
No active listings currently.
On M-EX Right Now
GB/T 699 45
2 active listings and RFQs →
IS 1570 (Part 4) 15Cr6Ni6
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GB/T 699 45 and IS 1570 (Part 4) 15Cr6Ni6?
Different category: GB/T 699 45 is Carbon Steel, IS 1570 (Part 4) 15Cr6Ni6 is Alloy Steel. GB/T 699 45 specifies P, S, Cu which are not specified for IS 1570 (Part 4) 15Cr6Ni6.
Can GB/T 699 45 be substituted with IS 1570 (Part 4) 15Cr6Ni6?
GB/T 699 45 and IS 1570 (Part 4) 15Cr6Ni6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.