Strong Match — 98.1% match
based on chemical composition and mechanical property overlap.
GB/T 700 Q275A (GB/T 700:2006) and GB/T 700 Q275D (GB/T 700:2006) are both steel grades.
Both fall under the Structural Steel category.
GB/T 700 Q275A is typically used for hot rolled structural sheets, strips, sections and bars for welding, riveting and bolting engineering, while GB/T 700 Q275D is commonly used for hot rolled structural sheets, strips, sections and bars for welding, riveting and bolting engineering.
GB/T 700 Q275A is defined under Guobiao Standards (GB/T), originating from China, while GB/T 700 Q275D is defined under Guobiao Standards (GB/T), originating from China.
As per chemical composition, GB/T 700 Q275A vs GB/T 700 Q275D is a 97.1% match.
As per mechanical properties, the match is 100%.
Combined, this makes them a strong match overall at 98.1%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
GB/T 700 Q275A
GB/T 700 Q275D
Tensile Strength
410-540 MPa
410-540 MPa
Yield Strength
>=275 MPa
>=275 MPa
Elongation
>=22%
>=22%
Condition
Hot rolled, controlled rolled or normalized; yield up to 16 mm, elongation up to 40 mm (N/mm2 = MPa)
Hot rolled, controlled rolled or normalized; yield up to 16 mm, elongation up to 40 mm (N/mm2 = MPa)
Typical Applications
GB/T 700 Q275A
Hot rolled structural sheets, strips, sections and bars for welding, riveting and bolting engineering
GB/T 700 Q275D
Hot rolled structural sheets, strips, sections and bars for welding, riveting and bolting engineering
Can GB/T 700 Q275A Be Substituted With GB/T 700 Q275D?
GB/T 700 Q275A and GB/T 700 Q275D overlap closely enough on chemistry and mechanical properties that GB/T 700 Q275D is often considered as a substitute for GB/T 700 Q275A in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between GB/T 700 Q275A and GB/T 700 Q275D?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can GB/T 700 Q275A be substituted with GB/T 700 Q275D?
GB/T 700 Q275A and GB/T 700 Q275D overlap closely enough on chemistry and mechanical properties that GB/T 700 Q275D is often considered as a substitute for GB/T 700 Q275A in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.