Post Stock Login Register

GOST 1050 45 vs GB/T 699 45

Close Alternative — 82.1% match based on chemical composition and mechanical property overlap.

GOST 1050 45 (GOST 1050-2013) and GB/T 699 45 (GB/T 699:2015) are both steel grades. Both fall under the Carbon Steel category. GOST 1050 45 is typically used for gears, shafts, spindles, bolts, axles, forged components, while GB/T 699 45 is commonly used for used for shafts, gears, bolts, connecting rods, axles, and hydraulic components.. GB/T 699 45 is defined under Guobiao Standards (GB/T) (China).

As per chemical composition, GOST 1050 45 vs GB/T 699 45 is a 98.2% match. As per mechanical properties, the match is 50%. Combined, this makes them a close alternative overall at 82.1%.

Frequently Compared With GOST 1050 45:
BS 970 (Part 1) 040A10 BS 970 (Part 3) 070M55 BS 970 (Part 1) 045A10 BS 970 (Part 1) 040A04 BS 970 (Part 1) 040A12 BS 970 (Part 1) 045M10 BS 970 (Part 1) 045M10 BS 970 (Part 1) 045A10 BS 970 (Part 3) 045A10 BS 970 (Part 3) 045M10 BS 970 (Part 1) 055M15 BS 970 (Part 1) 060A32
Match Breakdown
CHEMISTRY MATCH
98.2%
MECHANICAL MATCH
50%
OVERALL
82.1%
Specifications
Property GOST 1050 45 GB/T 699 45
Standard GOST 1050-2013 GB/T 699:2015
Category Carbon Steel Carbon Steel
C (%) 0.42-0.50 0.42-0.50
Si (%) 0.17-0.37 0.17-0.37
Mn (%) 0.50-0.80 0.50-0.80
S (%) <=0.040 <=0.035
P (%) <=0.035 <=0.035
Cr (%) <=0.25 <=0.25
Ni (%) <=0.25 <=0.30
Cu (%) <=0.25 <=0.25
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GOST 1050 45 GB/T 699 45
Tensile Strength 600-750 MPa >=600 MPa
Yield Strength >=355 MPa >=355 MPa
Elongation >=16% >=16%
Hardness 170-229 HB <=229 HB (as delivered, not heat treated)
Condition Not specified Normalized 25 mm sample blank, bars up to 80 mm; hardness for delivery state
Typical Applications
GOST 1050 45
gears, shafts, spindles, bolts, axles, forged components
GB/T 699 45
Used for shafts, gears, bolts, connecting rods, axles, and hydraulic components.
Can GOST 1050 45 Be Substituted With GB/T 699 45?
GOST 1050 45 and GB/T 699 45 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
Forms & Sizes Available on M-EX
GOST 1050 45
Round Bar → (2 listings)
Diameter: 40–40 mm (1.57–1.57 in)
Length: 6600–7000 mm (259.84–275.59 in)
GB/T 699 45
Round Bar → (2 listings)
Diameter: 40–40 mm (1.57–1.57 in)
Length: 5600–6600 mm (220.47–259.84 in)
On M-EX Right Now
GOST 1050 45
2 active listings and RFQs →
GB/T 699 45
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between GOST 1050 45 and GB/T 699 45?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can GOST 1050 45 be substituted with GB/T 699 45?
GOST 1050 45 and GB/T 699 45 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.