Post Stock Login Register

GOST 4543 30HN3A vs GB/T 3077 12Cr2Ni4A

Related Material — 56% match based on chemical composition and mechanical property overlap.

GOST 4543 30HN3A (GOST 4543-2016) and GB/T 3077 12Cr2Ni4A (GB/T 3077-2015) are both steel grades. Both fall under the Alloy Steel category. GOST 4543 30HN3A is typically used for used for aircraft fittings, shafts, gears, spindles, and heavy machinery parts., while GB/T 3077 12Cr2Ni4A is commonly used for used for gears, shafts, pinions, aircraft parts, heavy-duty bearings, and transmission components.. GB/T 3077 12Cr2Ni4A is defined under Guobiao Standards (GB/T) (China).

As per chemical composition, GOST 4543 30HN3A vs GB/T 3077 12Cr2Ni4A is a 71.4% match. As per mechanical properties, the match is 25%. Combined, this makes them a related material overall at 56%.

Frequently Compared With GOST 4543 30HN3A:
GOST 4543 12HN3A NF A35-565 100C6 UNI 11234 100Cr6 IS 1570 (Part 4) 10Cr20Mo6 IS 4367 10Cr9Mo10 IS 1570 (Part 4) 07Cr4Mo6 IS 4367 07Cr4Mo6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 7) 10Cr36Mo10H EN 10028-2 10CrMo9-10
Match Breakdown
CHEMISTRY MATCH
71.4%
MECHANICAL MATCH
25%
OVERALL
56%
Specifications
Property GOST 4543 30HN3A GB/T 3077 12Cr2Ni4A
Standard GOST 4543-2016 GB/T 3077-2015
Category Alloy Steel Alloy Steel
C (%) 0.27-0.34 0.10-0.15
Cr (%) 0.6-0.9 1.25-1.65
Ni (%) 2.75-3.15 3.25-3.75
Mn (%) 0.3-0.6 0.30-0.60
Si (%) 0.17-0.37 0.17-0.37
P (%) Not specified 0.025 max
S (%) Not specified 0.025 max
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GOST 4543 30HN3A GB/T 3077 12Cr2Ni4A
Tensile Strength 980-1180 MPa 980-1180 MPa
Yield Strength 835 MPa min 785-980 MPa
Elongation 10% min 10-14%
Hardness 285-352 HB 58-62 HRC (case)
Typical Applications
GOST 4543 30HN3A
Used for aircraft fittings, shafts, gears, spindles, and heavy machinery parts.
GB/T 3077 12Cr2Ni4A
Used for gears, shafts, pinions, aircraft parts, heavy-duty bearings, and transmission components.
Key Differences
Can GOST 4543 30HN3A Be Substituted With GB/T 3077 12Cr2Ni4A?
GOST 4543 30HN3A and GB/T 3077 12Cr2Ni4A share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GOST 4543 30HN3A
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 6000–6300 mm (236.22–248.03 in)
GB/T 3077 12Cr2Ni4A
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 5000–6600 mm (196.85–259.84 in)
On M-EX Right Now
GOST 4543 30HN3A
2 active listings and RFQs →
GB/T 3077 12Cr2Ni4A
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between GOST 4543 30HN3A and GB/T 3077 12Cr2Ni4A?
GB/T 3077 12Cr2Ni4A specifies P, S which are not specified for GOST 4543 30HN3A.
Can GOST 4543 30HN3A be substituted with GB/T 3077 12Cr2Ni4A?
GOST 4543 30HN3A and GB/T 3077 12Cr2Ni4A share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.